Xerox Phaser 6100DN Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Xerox Phaser 6100DN. Xerox Phaser 6100DN 32 halaman. Disk overwrite installation and usage
Juga untuk Xerox Phaser 6100DN: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

Halaman Cetak
Xerox Phaser 6100DN Panduan Pengguna

MICR Printers

MICR system differences

Table 1-1. MICR differences between DP 100/115/135/155/180 MX, DP 75 MX, and Nuvera MX
MICR fonts supported
Datastreams and
MICR font resolution
MICR mode automatic
adjustments
Secure Mode
automatic
adjustments
Diagnostic test forms
2
The following printers support MICR:
•
DocuPrint 100/115/135/155/180 MX
•
DocuPrint 75 MX
•
Nuvera 100MX Digital Production System
•
Nuvera 120MX Digital Production System
•
Nuvera 144MX Digital Production System
The systems have some differences in the adjustments they make
when entering MICR mode, and in the fonts and datastreams they
support.
The following table shows how these printers differ in their support
of MICR features.
DP 100/115/135/155/
180 MX
CMC7, E13B
IPDS⎯300 dpi
LCDS⎯300 dpi
PostScript⎯300 and
600 dpi
PCL⎯300 and 600 dpi
Darkness level set to
the default
Lead edge lightening
disabled
Static and dynamic job
sampling disabled
Repositioning output
disabled
LCDS, PostScript, and
PCL
DP 75 MX
E13B only
IPDS⎯300 dpi
LCDS⎯300 dpi
PostScript⎯300 and
600 dpi
PCL⎯300 and 600 dpi
Darkness level set to
the default
Repositioning output
disabled
IPDS, LCDS,
PostScript, and PCL
Nuvera MX
CMC7, E13B
IPDS⎯300 dpi
LCDS⎯300 dpi
PostScript⎯ 600 dpi
PCL⎯600 dpi
Darkness level set to
the default
Edge treatment
disabled
Static and dynamic job
sampling disabled
Repositioning output
disabled
IPDS, LCDS,
PostScript, and PCL
MICR User Guide