Xerox Phaser 7750 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Xerox Phaser 7750. Xerox Phaser 7750 35 halaman. Color laser printer
Juga untuk Xerox Phaser 7750: Spesifikasi (4 halaman), Brosur (8 halaman), Panduan Pemilik (4 halaman), Spesifikasi (2 halaman), Manual Jaringan (8 halaman), Pengaturan Cepat (5 halaman), Panduan Tambahan (5 halaman), Manuallines (5 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (16 halaman), Instal Manual (6 halaman), Panduan Pemilik (19 halaman), Panduan Pemilik (3 halaman), Panduan Pemeliharaan (1 halaman), Manual Warna (4 halaman), Panduan Instalasi (33 halaman), Panduan Referensi Cepat (8 halaman), Panduan Servis (14 halaman), Panduan Referensi Cepat (8 halaman), Panduan Referensi Cepat (8 halaman), Setup Manual (2 halaman), Dokumentasi Pengguna (17 halaman), Setup Manual (2 halaman), Menambahkan Memori Secara Manual (2 halaman)

Xerox Phaser 7750 Panduan Pengguna
.

Printer Calibration

Spectrophotometer-Based Calibration

There are two methods provided for entering the calibration data values measured by a
spectrophotometer. The first method allows you to use PhaserMatch or PhaserCal software to
control and communicate with a spectrophotometer that is connected to your computer. The
second method allows you to manually import LAB measured data.
The spectrophotometers that can be controlled by PhaserMatch or PhaserCal software are:
GretagMacbeth Spectrolino/SpectroScan
GretagMacbeth Eye-One System
X-Rite DTP-41
X-Rite DTP-70
X-Rite PULSE
X-Rite Digital Swatchbook
SpectroStar SpectroCam
Note:
PhaserMatch and PhaserCal software do not support any densitometers for performing
a color calibration procedure.
PhaserMatch and PhaserCal software walks you through a series of steps that generate and
download the calibration data to a printer.
To perform a spectrophotometer-based calibration:
1.
Launch the PhaserMatch or PhaserCal application.
2.
Click the Calibrate Printer button in the main screen.
3.
Click the Spectrophotometer-Based Calibration button in the main Calibrate Printer
screen
4.
Select a device from the list of supported spectrophotometers or select Manually Enter
Data.
5.
Select a printer, print quality, and paper type you use to do the calibration procedure.
PhaserMatch and PhaserCal 4.0 User Guide
2-1