Xerox Phaser 7750 Manual Jaringan - Halaman 5

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Perangkat lunak Xerox Phaser 7750. Xerox Phaser 7750 8 halaman. Color laser printer
Juga untuk Xerox Phaser 7750: Spesifikasi (4 halaman), Panduan Pengguna (35 halaman), Brosur (8 halaman), Panduan Pemilik (4 halaman), Spesifikasi (2 halaman), Pengaturan Cepat (5 halaman), Panduan Tambahan (5 halaman), Manuallines (5 halaman), Panduan Tambahan (2 halaman), Panduan Tambahan (16 halaman), Instal Manual (6 halaman), Panduan Pemilik (19 halaman), Panduan Pemilik (3 halaman), Panduan Pemeliharaan (1 halaman), Manual Warna (4 halaman), Panduan Instalasi (33 halaman), Panduan Referensi Cepat (8 halaman), Panduan Servis (14 halaman), Panduan Referensi Cepat (8 halaman), Panduan Referensi Cepat (8 halaman), Setup Manual (2 halaman), Dokumentasi Pengguna (17 halaman), Setup Manual (2 halaman), Menambahkan Memori Secara Manual (2 halaman)

Xerox Phaser 7750 Manual Jaringan

Connection Setup

Installing the Printer Driver
To download the latest printer drivers, go to www.xerox.com/office/support.
Windows 98 or Later and Windows 2000 or Later
Install the printer driver from the Printer Installer and Utilities CD-ROM. The Printer
Installer and Utilities CD-ROM automatically installs and identifies the printer during the
installation process. For more information go to
these documents:
Windows 98 and Windows Me: Document # 9840
Windows 2000, Windows XP, and Windows Server 2003: Document # 36894
Windows NT: Document # 11338
Macintosh OS 9.x EtherTalk
If you use EtherTalk, Macintosh computers do not require IP addresses.
1.
Open the AppleTalk Control Panel.
2.
Verify that the Ethernet port is the selected network port.
3.
Double-click the installer on the Printer Installer and Utilities CD-ROM to install the
printer driver.
4.
Open the Chooser, then click the LaserWriter driver.
5.
From the right column of the Chooser, select the printer, then click Create to create the
desktop printer.
For more information go to
and # 1886.
Macintosh OS X (10.1 and Higher)
Macintosh OS X supports TCP/IP as the default protocol, as well as AppleTalk. For a TCP/IP
installation, follow the instructions provided to set an IP address in the printer.
1.
Install the printer driver from the Printer Installer and Utilities CD-ROM.
2.
Open the Print Center utility. (On the Macintosh hard drive, open the Applications
folder, then open the Utilities folder.)
3.
Click the Add Printer button.
4.
Choose the connection type you desire.
For LPR, enter the IP address of the printer that you set previously. The Queue Name
field remains blank if the Use default queue on server box is checked (by default).
Other options are PS or AUTO. Select the appropriate PPD for the printer model
under the Printer Model drop-down list.
For AppleTalk, select the appropriate printer from the list that is displayed. The
configuration process continues until configuration is complete. If AppleTalk is not
available in the Print Center drop-down list, the AppleTalk protocol is disabled and
must be installed on the Macintosh. If the AppleTalk protocol is enabled, but is not
www.xerox.com/office/infoSMART
www.xerox.com/office/infoSMART
Phaser® 7750 Color Laser Printer
3-6
Connections and IP Address
to view
to view Documents # 2562