Xerox Synergix 8825 Panduan Tambahan - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Perangkat lunak Xerox Synergix 8825. Xerox Synergix 8825 26 halaman. Windows nt 4.0 postscript print driver user guide
Juga untuk Xerox Synergix 8825: Panduan Operator (48 halaman), Setup Manual (20 halaman), Catatan Rilis (23 halaman), Manual Perangkat Lunak (30 halaman)

Halaman Cetak

Adding a Folder to a Work

Station

Client Tool or Print Driver With Bi-

directional Capability

Client Tools and Print drivers that have bi-directional communications

capability will automatically update the finishing information when a folder is

added or updated. However, to do this the bi-directional feature must be

enabled and the Refresh printer configuration, Refresh on open must be

enabled.

Client Tool or Print Driver Without Bi-

directional Capability

Client Tools and Print Drivers that do not have bi-directional

communications capabilities must be updated using the Finisher File Creator

executable file (xesfin.exe). This file is found on the Xerox Engineering

Systems WEB site, www.xes.com.

Perform the following procedure to download xesfin.exe.

1. On the WEB site, click on Support>Downloads, then click on the

AccXES Family Products hyperlink.

2. Select Finisher File Creator, then Download Finisher File Creator.

3. Select or create a directory to download the file, xesfin.exe, into. Make

note of where it downloads too because you will need to reference it

later in the procedure.

4. Click Start>Programs>Command Prompt. The MS-DOS Prompt or

Command Prompt window will open (Figure 1).

XES Synergix 8825/8830/8855 Digital Solution Folding Supplement

5. (Figure 1): Type in the directory path to where the xesfin.exe file is

located as indicated by the arrows shown in this example. Press Enter to

display the message.

Figure 1. Example of Accessing the Finisher File Creator