Xerox Synergix 8830 Panduan Operator - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Operator untuk Perangkat lunak Xerox Synergix 8830. Xerox Synergix 8830 48 halaman. Windows nt 4.0 postscript print driver user guide
Juga untuk Xerox Synergix 8830: Setup Manual (20 halaman), Catatan Rilis (23 halaman), Panduan Tambahan (26 halaman), Manual Perangkat Lunak (30 halaman)

Halaman Cetak

OFF-LINE MENUS

Printer Menu - Finisher Settings

FINISHER SETTINGS

7. When FINISHER SETTINGS is displayed on the Control Panel, press the

Enter button to display the first feature.

8. Press the Enter button to select the FINISHER feature, or go to step 5 to

select the next feature.

FINISHER CONFIG TYPE = <001>

3. Press the Next (or the Previous) button in order to scroll through the

available settings.

4. Press the Enter button in order to enter your selection, or

press Exit if no change is required.

NOTE: Refer to the Folder User Guide for the appropriate value.

5. Press the Exit button in order to return to the FINISHER SETTINGS

submenu.

XES Synergix 8825/8830 Printer Operator Manual