Xerox Synergix 8830 Panduan Tambahan - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Perangkat lunak Xerox Synergix 8830. Xerox Synergix 8830 26 halaman. Windows nt 4.0 postscript print driver user guide
Juga untuk Xerox Synergix 8830: Panduan Operator (48 halaman), Setup Manual (20 halaman), Catatan Rilis (23 halaman), Manual Perangkat Lunak (30 halaman)

Halaman Cetak

Scanner

When using a scanner, the title block location selection (upper left, upper

right, lower left, and lower right) is as you would view the document to read it

(Figure 10). Some scanners provide a label (Figure 11) that indicates the

title block positions with the image in the face down position. This is done to

help the operator locate the title block with the document in the scan

position.

If a document has to be rotated to fit it into the scanner, the title block

location selection is still the original location as you would read the

document.

Note: When using the XES Synergix Digital Solution, the Auto Rotation

feature must be enabled, and the Output Format, Preset should be

used to match the output print size to the size of the document being

scanned.

Figure 10. Viewed as Read

(Image Up)

XES Synergix 8825/8830/8855 Digital Solution Folding Supplement

Title Block

Scan Direction

Figure 11. As Scanned

(Image down)

AUTO WIDTH DETECTION

If scanned documents are not being folded with the title blocked positioned

where it is visible, a possibility may be that Auto Width feature is not

functioning correctly. When using the XES Synergix Digital Solution, refer to

the scanner customer documentation, Cleaning and Maintenance.

Refer to the scanner customer documentation for any additional information

regarding the scanning of a document.