Xerox WORKCENTRE C2424 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 20 halaman. Copier-printer
Juga untuk Xerox WORKCENTRE C2424: Panduan Referensi Cepat (14 halaman), Brosur (8 halaman), Panduan Tambahan (7 halaman), Spesifikasi (6 halaman), Panduan Pengguna (43 halaman), Panduan Memulai (26 halaman), Panduan Pengguna (21 halaman), Panduan Pemeliharaan (20 halaman), Panduan Pengguna (19 halaman), Petunjuk Manual (16 halaman), Manual (12 halaman), Petunjuk Manual (6 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (2 halaman), Penggantian Kit Rol Umpan (2 halaman), Setup Manual (2 halaman), Templat Aksesibilitas Produk Sukarela (10 halaman), Perbandingan Kompetitif (3 halaman), Panduan Referensi Cepat (14 halaman), Panduan Servis (11 halaman), Panduan Referensi Cepat (13 halaman)

Halaman Cetak
Xerox WORKCENTRE C2424 Panduan Pengguna
3.
Select
System
Controls, then press the Enter button.
4.
Select
Power Saver
5.
Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the system goes
into Power Saver mode.
6.
Press the Enter button.
Using CentreWare IS
1.
Launch your web browser.
2.
Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Click the General folder on the left sidebar, then click Warmup.
5.
Select a value from the Power Saver Timeout drop-down list to change the setting.
6.
Click Save Changes at the bottom of the page.

Changing Intelligent Ready Mode

Intelligent Ready mode is an automated system that:
■
Monitors the system's usage.
■
Warms up the system when you are most likely to need it based on past usage patterns.
To turn on/off Intelligent Ready mode, use either:
■
The control panel
CenterWare IS
■
Using the Control Panel
To turn Intelligent Ready mode on/off:
1.
On the control panel, press the System Setup button.
2.
In the menu, select
General
3.
Select
System
Controls, then press the Enter button.
4.
Select
Intelligent
Ready.
5.
Select
On
or Off, then press the Enter button.
Timeout, then press the Enter button.
Setup, then press the Enter button.
WorkCentre® C2424 Copier-Printer
1-16
System Settings