Xerox 6180DN - Phaser Color Laser Printer Panduan Memulai - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Server Cetak Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 37 halaman. 26-ppm monochrome/ 20-ppm color
Juga untuk Xerox 6180DN - Phaser Color Laser Printer: Panduan Instalasi (34 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (2 halaman), Instal Manual (2 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman), Spesifikasi (4 halaman), Manual (28 halaman)

DOCUSP 4.1

DocuColor printer specific changes

The following are new features specific to the DocuColor iGen3,

and the DocuColor 2045, 2060, 5252, 6060, and 8000 printers.

This release of DocuSP introduces a new DocuColor printer, the

DocuColor 8000. The DocuColor 8000 is an 80 page per minute

full color printer.

SWOP Plus allows the user to take advantage of the popular

SWOP look but leverages the digital press gamut.

Maximum grey color removal reduces the level of C, M, and Y to

produce more black (K) replacement. While the overall color can

be impacted, the benefit in reduced color toner usage can be

applied in less critical color applications.

New halftone screens are available to enhance image quality.

The specific halftone values vary based on printer model and are

optimized for the specific printer model.

Source profile overrides are now available as user selections

from the client job submission applications and at the DocuSP on

a page, job, and queue level. The DocuSP job attribute

precedence model applies to this override option.

This release of the DocuSP software automatically restricts the

interface for the queue property option settings to restrict the

ability to set VI object cache and parallel RIP at the same time.

♦

Enable/disable parallel RIP now enables or disables all

parallel RIP behaviors. Previous releases required the user

to disable the parallel RIP capability by manually creating an

unprotected queue.

♦ If VI object cache is enabled, parallel RIP is automatically

disabled. If parallel RIP is enabled, VI cache is automatically

disabled.

This behavior was initially available in DocuSP patch version

3.8.18 or higher.

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED