Xerox DocuPrint 75 MX Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Cetak Xerox DocuPrint 75 MX. Xerox DocuPrint 75 MX 32 halaman. Freeflow print server micr user guide
Juga untuk Xerox DocuPrint 75 MX: Panduan Pengguna (40 halaman)

Halaman Cetak

NOTE: 600 dpi PCL fonts must not be used with a 300 dpi queue

or with any 300 dpi resources. The resolution mismatch causes

characters to be one dot further apart than is nominal. While this

spacing meets industry standards, a high reject rate can result if

the adjacent field spacing does not compensate for this error.

You can use the PCL Unit of Measure command to set the PCL

Unit to 600 (for example, <ESC>&u600D). Alternatively, you can

override the resolution to 600 dpi in the queue. Refer to "Setting

the font resolution," later in this chapter, for information on setting

the resolution in the queue.

MICR User Guide