Xerox FreeFlow Manual Prosedur Operator - Halaman 20

Jelajahi secara online atau unduh pdf Manual Prosedur Operator untuk Server Cetak Xerox FreeFlow. Xerox FreeFlow 28 halaman. For color 560/570 printer
Juga untuk Xerox FreeFlow: Panduan Instalasi (34 halaman), Brosur (2 halaman), Catatan Rilis (23 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (33 halaman), Informasi Instalasi Penting (2 halaman), Panduan Pengguna (50 halaman), Manual (18 halaman), Panduan Hubungkan Cepat (2 halaman)

Xerox FreeFlow Manual Prosedur Operator
Xerox FreeFlow Print Server for Color 560/570 Print Server
2.2.48
Plug the power cable into the port on the back of the
Cisco switch.
Plug the other end into the AC wall receptacle.
2.2.49 Plug the AC power cables for the
Server and the
monitor into the AC wall receptacle.
Do not look for an AC power cord when unpacking the
Black Box switch. This switch is powered through the USB
cable that connects to the back of the Xerox FreeFlow
Print Server.
If this Black Box switch is not part of the system
configuration, jump to Step 2.2.55.
2.2.50
Retrieve the box with the Black Box hub. Remove the
switch and
the USB power cable from the box.
2.2.51 Plug the USB power cable into the back of the switch.
2-14
Xerox FreeFlow Print
Installation
Carrier Procedure Manual