Xerox Legacy 4110 Panduan Untuk Operator

Jelajahi secara online atau unduh pdf Panduan Untuk Operator untuk Server Cetak Xerox Legacy 4110. Xerox Legacy 4110 1 halaman. Server & controller solutions printing from mac os
Juga untuk Xerox Legacy 4110: Panduan Untuk Operator (1 halaman), Petunjuk Pengoperasian Dasar Mesin Fotokopi (2 halaman), Catatan Rilis (1 halaman), Panduan Tambahan (1 halaman), Catatan Rilis Pelanggan (24 halaman), Opsi Cetak (24 halaman), Manual Pencetakan (24 halaman)

Halaman Cetak
Xerox Legacy 4110 Panduan Untuk Operator
Product
Xerox 4110 / 4590 Copier Printer
"How Do I?" guide for Operators
Covered:
How to find MAC address of 4110/4590 built-in Controller
•
How to find MAC address of 4110/4590 Fiery Controller
•
How to find MAC address of 4110/4590 DocuSP Controller
•
How to find MAC address of 4110/4590 built-in Controller
To find the Media Access Control (MAC) address of the 4110/4590 do the following:
1. Print the Configuration Sheet / System Setting List
a. Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed on
the Touch Screen.
b. Select the [Billing Meter / Print Report] tab.
c. Select the [Print Report / List] button.
d. Select the [Print Mode Settings] button.
e. Select the [Setting List - Common Items] button.
f.
Press the [Start] button on the Control Panel to print the list.
2. After printing the system settings sheet find the header Communication Settings (most likely on page 3 of the
Systems Settings list), the MAC address will be under Ethernet Settings.
NOTE: In this instance, MAC refers to Media Access Control, not the Macintosh.
How to find MAC address of 4110/4590 Fiery Controller
To find the MAC Address on the Fiery DFE Controller:
1. Select [START]
2. Select [Run]
3. Type – cmd and then select [OK]
4. In the CMD Window type – ipconfig /all – then press 'enter'
5. Read the MAC Address as the 'physical address' that is just above the customer's ip address.
How to find MAC address of 4110EPS/4590EPS/4595 DocuSP Controller
To find the MAC Address on the DocuSP DFE do the following:
1. Log on as Administrator User
2. Select [Setup] – Pulldown from top middle of screen.
3. Select [Network Configuration]
4. Select the [Connections] Tab at top of screen
5. The MAC Address is displayed
Title
Find the MAC address
Date
May 2007
Page 1 of 1