Xerox Nuvera 100 Panduan Tambahan - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Server Cetak Xerox Nuvera 100. Xerox Nuvera 100 48 halaman. Production system
Juga untuk Xerox Nuvera 100: Lembar Spesifikasi (2 halaman), Panduan Fitur (34 halaman), Manual Perencanaan (22 halaman), Panduan Pengguna (40 halaman), Panduan Pengoperasian (34 halaman), Panduan Referensi (2 halaman), Manual Perencanaan (20 halaman), Panduan Referensi (42 halaman), Referensi Cepat (2 halaman), Instal Manual (2 halaman), Manual Perencanaan (38 halaman), Manual Perencanaan (16 halaman), Panduan Referensi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Memulai (26 halaman), Panduan Memulai (30 halaman)

Managing and printing jobs from the Tape Client

2-10

Figure 2-7. Job Descriptor Library window

4. On the resources list, click the name of the JDL, JDE, or form

that you want to use for the job. Your selection appears in the

read-only Selection field.

5. Click OK. The library window closes, and the name of the

resource that you selected appears in the read-only Initial...

field on the Tape Client window.

NOTE: If you selected a new JDL, a window displays the

following message when you click OK:

You may have to select a new JDE entry.

When you click OK to close the message window, the Job

Descriptor Entry library window opens. Select an initial JDE

from this window, then click OK to close it.

6. Repeat steps 3 through 5 for any other initial resources that

you want to specify.

Tape Client Job Submission Guide