Xerox Nuvera 100 Panduan Petunjuk dan Tips - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk dan Tips untuk Server Cetak Xerox Nuvera 100. Xerox Nuvera 100 18 halaman. Production system
Juga untuk Xerox Nuvera 100: Lembar Spesifikasi (2 halaman), Panduan Fitur (34 halaman), Manual Perencanaan (22 halaman), Panduan Pengguna (40 halaman), Panduan Pengoperasian (34 halaman), Panduan Referensi (2 halaman), Manual Perencanaan (20 halaman), Panduan Referensi (42 halaman), Referensi Cepat (2 halaman), Instal Manual (2 halaman), Panduan Tambahan (48 halaman), Manual Perencanaan (38 halaman), Manual Perencanaan (16 halaman), Panduan Referensi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Memulai (26 halaman), Panduan Memulai (30 halaman)

New Capabilities in

Version 10.2

Software

The following is a list of new capabilities enabled with version 10.2 software:

1. The Xerox Tape Binder (XTB) is now configurable in Dual Mode (2 XTB's connected

together).

2. Disable status messages when trays are disabled. This de-clutters the status message area

when a tray is disabled.

3. Add a custom edge erase feature that can set the edge erase in the range of 0 mm to 6

mm for each of the four edges.

4. Added the ability to disable/enable a stacker (on DS3500 or BFM). This allows the user to

disable a stacker if they want to restrict jobs from going to that stacker and then re-enable

later.

5. Enable both top trays for purge events on systems with 2 top trays. This will improve

purge effectiveness.

6. Improved jam clearance by adding additional areas that can be purged to the 5B area.

7. Added several new Finisher profiles to the catalog.

Hints and Tips Guide

2-1