Xerox Phaser 6100DN Panduan Memulai - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Server Cetak Xerox Phaser 6100DN. Xerox Phaser 6100DN 34 halaman. Disk overwrite installation and usage
Juga untuk Xerox Phaser 6100DN: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

Two-Stage Resource-Based Scheduling

DocuSP 4.2 provides a mechanism to:

♦ Determine all the resources required by a RIP-input job

before scheduling the job for printing.

♦ Allow the customer to choose between this new scheduling

mode and the existing modes.

♦ Prevent a job from being erroneously scheduled in the

event that some of the required media is unavailable.

The scheduling modes that are available under DocuSP 4.2

are:

♦ First-in, first-out (FIFO)

♦ Resource-Based (RBS)

♦ Enhanced Resource-Based (Enhanced RBS)

In DocuSP 4.2, the common controller is extended to support

21 more paper sources for PCL. Under DocuSP 4.1, the PCL

decomposer provided a total of 6 PCL paper sources, which

does not meet the capabilities of certain systems; for example,

the Nuvera product may have up to 12 physical feeds by

allowing customers to add external paper feeder modules.

With DocuSP 4.2, customers with systems that have more

than 6 trays can map a unique PCL paper source to each of

their trays.

Intelligent Print Data Stream (IPDS) is a sequence of

information transmitted by an IBM host computer as directed

by the Print Service Facility (PSF). In addition to delivering

print information, the IPDS data stream performs printer

control functions and shares job status information.

The DocuSP IPDS gateway is now available in DocuSP 4.2

and is configured by means of a Graphical User Interface

(GUI), featuring drop-down menus, tabs, and icons from which

to manage the DocuSP IPDS functions. DocuSP IPDS

supports the TCP/IP and online channel interfaces.

IPDS is not available on the Sun W1100Z (x86 AMD)

controller for the DocuTech and DocuPrint products. IPDS is

not available for the DocuColor or iGen3 products.

DocuSP IPDS does not currently support any non-Xerox Front

End Processors. Certain FEPs may work successfully but

interoperability is not guaranteed.

Refer to the DocuSP IPDS User Guide for additional

information on IPDS.