Xerox Phaser 6100DN Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Cetak Xerox Phaser 6100DN. Xerox Phaser 6100DN 32 halaman. Disk overwrite installation and usage
Juga untuk Xerox Phaser 6100DN: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

Xerox Phaser 6100DN Panduan Pengguna

Selecting MICR fonts

Checking the font version

8
Selecting the wrong font can result in improper signal strength and
high reject rates at the bank. To make sure that you have the font
that you want, print a question mark, ?, in the MICR line. While
the resulting document does not have a valid MICR line, the
printed font is obvious. You can also print a test pattern. Refer to
"Printing MICR test forms," for the procedure.
The test forms contain font version information: the font name,
revision character (if applicable), and the datastream type (PS,
PCL, LCDS).
The following table shows the version information that is displayed
on the test form for each font:
Table 1-2. Test Form Font Information
Datastream /
Font type
E13B
PostScript Type 1
Type 1
E13B
PostScript Type 3
Type 3
E13B
PCL
E13B
PCL
E13B
LCDS
Landscape
E13B
LCDS
Portrait
Type
Resolution
600 dpi
300 dpi
600 dpi
300 dpi
300 dpi
300 dpi
Version
information
E13B
609
PS
E13B
4230
PS
E13B
609
PCL
E13B
REV.A
PCL
E13B4L
REV
A
E13B4P
REV
A
MICR User Guide