Clarity D703HS Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Handset Clarity D703HS. Clarity D703HS 8 halaman. Expandable handset for clarity

HOW TO REGISTER YOUR HANDSET

•

Then press # on handset

3. Press and hold FIND on the telephone base for about four

seconds.

4. Press # (pound key) on the handset. The screen shows

Registering...Please wait.

When the handset is registered successfully, HANDSET

registered and then HANDSET X appears on the screen, with X

being the handset number (1-5).

If the registration is not successful, the handset screen shows

Registration failed. Please start again from step 1 above.

Note: You cannot register a handset if any other system handset is in

use. To register an expansion handset, follow from the step 3 as above.

HOW TO DEREGISTER YOUR HANDSET(S)

Deregister all handsets

You can deregister handsets. You may need to deregister your handsets

if:

You have five registered handsets and need to replace a handset.

-OR-

You wish to change the designated handset number of your

registered handsets.

You must first deregister ALL the handsets, and then register each

handset you wish to use again, one at a time.

1. Press and hold FIND on the telephone base for about 24

seconds; release FIND.

2. Immediately press FIND again.

3. When complete, the handset screen alternately shows

• Press HS LOC on base 4 sec

and

• Then press # on handset.

4. To register the handset(s) to the telephone base again, follow

the registration instructions in section Register a handset.

NOTE: There are no visual or audible alerts to indicate

the base is under deregistration mode.