Direct Supply Panacea Transport dolly Panduan Pemilik - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Medis Direct Supply Panacea Transport dolly. Direct Supply Panacea Transport dolly 8 halaman. For panacea 3000, 3250 and 3500 beds
Halaman Cetak
5. Rotate bed ¼ or a turn and align holes between the
handle bar and carrier arm.
6. Insert spacer between the handle bar and carrier arm.
7 . Insert hex bolt through handle bar, spacer and carrier
arm. Tighten jam nut on bolt.
8. Repeat steps 6 & 7 for the other end of the bed. The bed
is ready to be transported.
Detaching Transport Dolly
1. Remove jam nut from hex bolt and pull bolt out. Save
jam nut and hex bolt.
2. Remove and save spacer.
3. Repeat steps 1 & 2 for the other end of the bed.
4. Rotate the bed so the deck side is up.
5. Remove cable tie from the electrical power cord
and handset, and plug the power cord into a
compatible receptacle.
Handle Bar
Hex Bolt
Spacer
Carrier Arm
Handle Bar
Hex Bolt
Spacer
Carrier Arm
1-800-634-7328
DirectSupply.com
Jam Nut
Jam Nut
5