Clarity C120 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Clarity C120. Clarity C120 19 halaman. Tv listener
Juga untuk Clarity C120: Panduan Pengguna (19 halaman)

Halaman Cetak

C120

OPERATION

CONNECTING THE TRANSMITTER

Power

First, connect the Power Supply into the DC12V

DC1 2 V

jack located on the back of the base. The DC12V

port is illustrated in Fig. 2. Then plug the Power

Supply into a wall outlet.

FIG. 2

Audio

Next, using one of the Audio Cable supplied,

connect the base unit directly to the TV, VCR,

or other equipment output jacks. See different

connection options listed below.

Included in the package, there are two cords to

use for the incoming audio. One will have two

RCA jacks (red and white) on both ends. (Fig.

3) This can be used to connect with devices with

both Right and Left channel RCA jacks (TV's,

VCR's, etc). The other is a cord with two RCA

jacks (red and white) on one end and on the

other is a 3.5mm jack. (Fig. 4) A 3.5mm jack is

the size found on a pair of headphones. This can

be used to connect the C120™ to devices with

3.5mm ports, such as CD players, radios and

other small electronics. See Figures 6-9.

1. Stereo Mode:

(For Highest Sound Quality) This mode should

be used if the television (or other audio equip-

ment) has two RCA audio jacks (red and white).

STEREO

MONO

See Figures 3 and 4.

FIG. 3

Connect the RCA plugs from the speaker

output of the TV or VCR into both the left

and right RCA jacks on the base.

V C R

Next, select "Stereo" on the

Mono/Stereo switch.

FIG. 4