Direct Supply Maxwell Thomas Athens Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perabotan Dalam Ruangan Direct Supply Maxwell Thomas Athens. Direct Supply Maxwell Thomas Athens 12 halaman. Dining table

Halaman Cetak

Assembly Instructions – Pedestal Bases

Nut

Spider/Inner

Column Bolts

Spider

Inner Column

Adjustment

Lever

Outer Column

Gas Cylinder Threaded

Spider Bolt

Gas Cylinder

Threaded Base

Plate Bolt

Base Plate

Figure 4

Nexus Air – Assist Pedestal Base Assembly

1. Insert the gas cylinder into the inner and

outer column assembly while holding the gas

cylinder in place.

2. Thread the spider bolt on the top end (top) of the

gas cylinder into the center hole on the spider.

3. Thread the three spider/inner oolumn bolts

through the top of the spider to connect the

spider to the inner column.

4. Insert the threaded bolt attached to the

bottom of the gas cylinder into the center

hole of the base plate and thread the nut onto

the bolt tightly.

5. Attachment to the tabletop is the same as a

standard pedestal base.

Nexus Air – Assist Pedestal Base Operation

At least two people are required to adjust the

table's height.

1. Pull the pin from the adjustment lever.

2. Lift up on the adjustment lever while the

second person lifts the tabletop up or pushes

the tabletop down.

3. Once desired height is reached, release the

adjustment lever and make sure the inner

column is locked in place. Insert the pin to

lock the lever so it is facing down as seen in

Figure 4.

Nexus Telescoping Pedestal Base Operation

At least two people are required to adjust the

table's height.

1. Remove everything from the tabletop.

2. An additional person is required to hold the

tabletop in place as the first person turns the

locking bolt counterclockwise to release the

inner column.

3. Lift the tabletop up or down to the desired

height while the first person tightens the

locking bolt turning it clockwise to lock the

inner column in place.

(cont.)