Alderon Industries Check It Panel Panduan Pengoperasian, Pemeliharaan & Pemasangan - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengoperasian, Pemeliharaan & Pemasangan untuk Panel Kontrol Alderon Industries Check It Panel. Alderon Industries Check It Panel 6 halaman. 1 phase simplex demand dose
Halaman CetakCheck It Panel
1 Phase Simplex Demand Dose
Operation, Maintenance & Installation Manual
Incoming Power Configurations:
The Check It series control panels may be ordered with or without circuit breakers. Check schematic which
will show exact configurations. Illustrations below shows how to connect power for the pump and the
control circuits.
Pump Power Configurations
120 VAC with Circuit Breaker
Incoming
Incoming Pump
Power
Connections
Mounting Level Switches:
Float switches are most commonly used, but the Check It series control panels can be used with any dry
contact type level or pressure switch. Illustrations show float switches installed for pump down applica-
tions. Reverse float order for Pump Up applications. Refer to float switch instuctions for mounting of pipe
clamp or weighted floats.
Alarm Float
Start Float
Stop Float
TM
120/230 VAC with Circuit Breaker
120 VAC or 230 VAC
without Circuit Breaker
Alarm/Control Power
Configuration
L1 N
P/N L1153
Page 2 of 6