eControls C365T11 Penginstal dan Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Penginstal dan Panduan Pengguna untuk Termostat eControls C365T11. eControls C365T11 13 halaman.
Juga untuk eControls C365T11: Panduan Pengguna (4 halaman), Penginstal dan Panduan Pengguna (13 halaman)

Halaman Cetak
8
Overriding Automatic Airflow
To override the AUTOMATIC AIRFLOW to the downstairs living area or
the upstairs sleeping area:
Sleeping
Airflow %
Hold
Living
Living
COOL
Eve
We
SYSTEM
PM
AUTO
MENU
MODE
FAN
Airflow % will blink in override
After 3 hours, the thermostat returns to automatic operation. The
override range is defined by the installer during set up.
9
Terminating Airflow Override
To terminate Airflow Override:
Sleeping
Airflow %
Hold
Living
Living
Eve
COOL
We
SYSTEM
PM
AUTO
MENU
MODE
FAN
User Menu Key Options
1
Set Schedule
Option 2 is only displayed if User Airflow Control has been
enabled by installer using the installer options.
2
Turning Automatic Airflow Control Off
Options 3-5 will not be displayed is Airflow Control has been
turned off by the installer.
3
Turning Nighttime Airflow Control On or Off
4
Setting Nighttime Airflow in Heating
5
Setting Nighttime Airflow in Cooling
6
Cleaning the Touchscreen
Factory Set Schedule
The thermostat comes pre-set with the following energy-saving
schedule for weekdays (Mon-Fri) and weekends (Sat-Sun).
Using these settings can reduce your heating/cooling expenses.
Monday through Friday
Morn
Day
Even
Nite
Saturday and Sunday
Morn
Day
Even
Nite
Touch AIRFLOW% as shown.
Touch the UP key to increase the
upstairs sleeping area airflow (the living
area airflow will automatically decrease).
Touch the DOWN key to increase
downstairs living area airflow (the
upstairs airflow will automatically
decrease).
Touch AIRFLOW% as shown.
Touch the MODE key to terminate airflow
override.
The thermostat returns to automatic
airflow control. The AIRFLOW % returns
to the airflow prior to the override.
Time
Heat
Cool
6:00 AM
70
75
8:00 AM
62
83
6:00 PM
70
75
10:00 PM
62
78
Time
Heat
Cool
6:00 AM
70
75
8:00 AM
62
83
6:00 PM
70
75
10:00 PM
62
78
1
Change Factory Set Schedule
To change the start time or heating or cooling setpoint for the morning,
daytime, evening or night schedule, touch the MENU key to display
SCHEDULE. The thermostat defaults to the weekday schedule. If no
key is touched, the thermostat returns to normal operation after about
30 seconds.
Schedule
Mo
Tu
We
ThFr
MENU
NEXT
ENTER
Schedule
Morn
Mo
Tu
We
ThFr
AM
MENU
NEXT
ENTER
Heat
Set To
Schedule
Morn
Mo
Tu
We
ThFr
AM
MENU
NEXT
ENTER
Cool
Set To
Schedule
Morn
Mo
Tu
We
ThFr
AM
MENU
NEXT
ENTER
Continue setting the start times, heating setpoints, and cooling
setpoints for the Day, Evening and Night schedules.
Touch ENTER to save the schedule.
2
Automatic Airflow Control On or Off
This option is only displayed if User Airflow Control has been
turned on by the installer in the Installer Options.
Homeowners with an unusual schedule, home office, etc. may want
to use this option.
With Automatic Airflow Control Off, the Nighttime Airflow option is
still enabled. If desired, the homeowner can turn the Nighttime
Airflow option off using User Option 3,
Thermostat defaults to Automatic Airflow Control On and automatically
directs more airflow to where it's needed. When Automatic Airflow
Control is Off, the user must set the airflow.
Touch the MENU key until the following thermostat screen is displayed.
Airflow %
MENU
NEXT
ENTER
To turn Automatic Airflow Control OFF, touch the DOWN key.
Control On, touch the UP key.
Touch the
MENU
key to save and go to next option or touch the
11
the options and return to normal thermostat operation.
SELECTING THE WEEKDAY OR
WEEKEND SCHEDULE
The thermostat defaults to the weekday
schedule. Touch the NEXT key to change
the weekday schedule start times, and
heating or cooling setpoints. Or press the
DOWN key to select weekend schedule)
the touch NEXT.
SETTING THE MORNING SCHEDULE
START TIME.
Touch the UP/DOWN keys to change the
Morning Schedule Start Time. Touch
NEXT.
SETTING THE MORNING SCHEDULE
HEATING TEMPERATURE.
Touch the UP/DOWN keys to change the
Morning Schedule Heating Setpoint. Touch
NEXT.
SETTING THE MORNING SCHEDULE
COOLING TEMPERATURE.
Touch the UP/DOWN keys to change
Morning Schedule Cooling Setpoint. Touch
NEXT.
Airflow %
MENU
NEXT
ENTER
To turn Automatic Airflow
ENTER
key to save