eControls RT2 Panduan Pengguna & Pemasang - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna & Pemasang untuk Unit Kontrol eControls RT2. eControls RT2 8 halaman. Wireless whf control
Juga untuk eControls RT2: Panduan Pemilik Rumah dan Pemasang (12 halaman)

Halaman Cetak
Installing the Optional Damper Control
The Damper Control is used when power actuators are
required for heavy duty dampers with higher thermal
insulation.
RM2 Radio Module
RJ11 Splitter supplied
with Damper Control
3-foot RJ11 cable
supplied with FC2J
Model DC120-O
To Ground
To 120VAC Power
To 120VAC Neutral
To Damper Neutral
To Damper 120VAC
To Damper Open

INSTALLER OPTIONS

1
Set the FAN number
(Only required when using more than 1 WHF)
2
Set ADDRESS number
(Only required if other RT2 installations within 300 feet)
3
Select Type of WHF
INSTALLER SECTION
Electrical box on WHF
FC2J Relay Board
3-foot RJ11 cable
supplied with Damper
Control
The Damper Control is installed in a separate electrical
box and coneected to the damper actuators and either
24VAC or 120VAC depending on the actuators and
corresponding Damper Control being Used.
New electrical box
Damper Control
Model DC120-OC
To Ground
To 120VAC Power
To 120VAC Neutral
To Damper Neutral
To Damper Close
To Damper Open
ACCESS INSTALLER OPTIONS
Outdoors
Cool
Linked
Set To
Menu
7
Model DC24-OC
Access the Installer Options
Indoors
o
F
by pressing and holding the
MENU key for about 7
seconds until Option 01 is
displayed.
Econo
Cooling
OFF
To Ground
To 24VAC Power
To 24VAC Com
To Damper Com
To Damper Close
To Damper Open