Yamaha ARIUS YDP-S35 Referensi Midi - Halaman 3

Jelajahi secara online atau unduh pdf Referensi Midi untuk Alat Musik Yamaha ARIUS YDP-S35. Yamaha ARIUS YDP-S35 4 halaman.
Juga untuk Yamaha ARIUS YDP-S35: Panduan Pengoperasian Cepat (2 halaman), Panduan Pemilik (48 halaman)

Yamaha ARIUS YDP-S35 Referensi Midi
Program Change ON/OFF
The information related to Voice changes is called "program change" in MIDI. Sending and receiving program change
messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive
parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer.
(However, the Voice as played from the keyboard is maintained and does not change.)
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4 key. Pressing the
C4 key repeatedly toggles between Local Control On and Off.
Control Change ON/OFF
Information related to non-note expressive changes, such as the use of a sustain pedal, is called "control change" in
MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For
example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument
can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played
from the instrument is maintained and does not change.)
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C#4 key. Pressing
the C#4 key repeatedly toggles between Local Control On and Off.
Voice List
Voice Name
CFX Grand
Mellow Grand
Pop Grand
Stage E.Piano
DX E.Piano
Harpsichord
Vibraphone
Pipe Organ
Jazz Organ
Strings
C4
C#4
MSB
LSB
Program Change #
(0-127)
(0-127)
108
0
108
1
108
1
108
0
108
0
108
0
108
0
108
1
108
0
108
0
Highest key
Highest key
(1-128)
1
1
2
5
6
7
12
20
17
49
YDP-165, YDP-145, YDP-S55, YDP-S35 MIDI Reference
Voice List
For information on program
change numbers for each of
the Voices of the instrument,
see the "Voice List" below.
Default setting: ON
For information on control
changes that can be used with
the instrument, see "MIDI
Implementation Chart" page 4.
Default setting: ON
3