Yamaha AVANTGRAND N3 Panduan Pemilik - Halaman 40

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha AVANTGRAND N3. Yamaha AVANTGRAND N3 49 halaman. Yamaha electronic keyboard user manual
Juga untuk Yamaha AVANTGRAND N3: Panduan Pemilik (49 halaman)

Halaman Cetak

Problem

The instrument does not turn on.

Noise is heard from the speakers or head-

phones.

The overall volume is low, or no sound is

heard.

Sound is still heard from the instrument even

though headphones are plugged in.

Sound is still heard from the instrument even

though the volume is set to the minimum.

The pitch and/or tone of the Piano Voices in

certain ranges do not sound right.

Sound is not heard on a particular key.

Sound input to the AUX IN jacks is inter-

rupted.

The damper pedal has no effect.

The USB ﬂash memory device has hung up

(stopped).

* The message list (page 39) is also provided for your reference.

Maintenance

When the surface of the instrument loses luster, wipe the instrument evenly with a cloth moistened with some special piano

cleaner. For more information, contact the store where you purchased the instrument.

• N3/N2

Owner's Manual

Troubleshooting

Possible Cause and Solution

The instrument has not been plugged in properly. Securely insert the female plug into

the socket on the instrument, and the male plug into a proper AC outlet (page 10).

The noise may be due to interference caused by the use of a mobile phone in close

proximity to the instrument. Turn off the mobile phone, or use it further away from the

instrument.

• The Volume is set too low: set it to an appropriate level using the [MASTER VOL-

UME] control (page 12).

• Make sure a pair of headphones is not connected to the headphones jack (page 14).

• Make sure that Local Control (page 38) is on.

When the TRS is on, sound can be heard slightly even if the headphones are con-

nected. Turn the TRS off to mute all sound other than the headphones (page 23).

When the TRS (page 23) is on, sound can be heard to some degree even when the

volume is set to the minimum. This is normal, and is not a malfunction.

The Piano Voices attempt to precisely simulate actual piano sounds. However, as a

result of sampling algorithms, overtones in some ranges may sound exaggerated, pro-

ducing a somewhat different pitch or tone. This is normal, and no cause for concern.

Keyboard may not function normally if the key was pressed when the power was

turned on. Turn off the power and turn it again to reset the function. Do not touch any

keys when turning the power on.

The output volume of the external device connected to this instrument is too low.

Increase the output volume of the external device. The volume level reproduced via

this instrument's speakers can be adjusted by using the [MASTER VOLUME] control.

(N3)

•

The pedal cord may not be properly connected. Make sure to securely insert

the pedal cord into the pedal jack (page 42).

(N2)

•

The damper pedal was pressed when the power was turned on. This is not a

malfunction; press the pedal again to reset the function.

• Disconnect the device and connect it to the instrument again.

• The USB ﬂash memory is not compatible with the instrument. Only use the USB

ﬂash memory device whose compatibility has been conﬁrmed by Yamaha (page 30).