Yamaha AVC7 SG Panduan Pemilik - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha AVC7 SG. Yamaha AVC7 SG 2 halaman. Viola/cello

Halaman Cetak

■ Stringing the strings on

the tailpiece

At the tailpiece, hook the string's ball end onto the fine

tuner's notch.

[Viola]

String

[Cello]

String

Fine Tuner's notch

Ball End

Fine tuner

Tailpiece

Ball End

Fine tuner

Tailpiece

Fine tuner

Ball End

String

Tailpiece

Fine tuner

Ball End

■ Checking the Bridge's

Position

While tuning or changing the strings, check the position

and angle of the bridge.

[Viola]

Make sure the strings are

seated in their correspond-

ing notches on the bridge.

Make sure the side of

the bridge with the logo

is facing the tailpiece.

"f" holes

Correct

Bad

■ Winding the strings

Insert the string into the hole on its corresponding tuning

peg and wind the string onto the peg as shown below. Ap-

ply some pressure (push in) to the peg as you turn it.

Make two winds toward the end of the peg and

the remaining winds toward the peg handle.

3rd & 4th strings

3rd string (G3)

Rotate the

peg as

shown

4th string (C4)

[Cello]

Make sure the strings are

seated in their correspond-

ing notches on the bridge.

[Tailpiece side]

Make sure the bridge

is positioned between

the notches in the "f "

holes as shown below.

T h e s i d e o f t h e

Right

bridge facing the

Angle

tailpiece should be

at a right angle com-

pared to the body.

1st & 2nd strings

2nd string (D2)

Rotate the

peg as

shown

1st string (A1)