Yamaha CH-500 Panduan Pemilik - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha CH-500. Yamaha CH-500 7 halaman. Chimes; chimes stand
Juga untuk Yamaha CH-500: Panduan Pemilik (6 halaman)
Halaman Cetak
CHS-506
With the fixing hole on the base bar aligned with
the bolt hole in the base, connect the base bar to
the base. Tighten the block bolt to secure the base
bar to the base. (The upper end of the side col-
umn acts as tool to tighten the block bolt. Insert
the upper end of the column and tighten the block
bolt by rotating the side column.)
Base
Block Bolt
After tightening the block bolt, re-insert the side
column into the base with making sure that the
side column's hanger attachment positioned up-
right.
Base Bar
* Disassembly is performed simply by reversing the assembly order.
8
ASSEMBLY PROCEDURE
Side Column
Hanger Bar Attachment
Fixing Hole
Base Bar
Side Column
Fit the guide board onto the side columns and
lower the guide board until it rests on the board
rest.
Guide Board
Attach the hanger bar on the top of the side col-
umns and secure with the wing bolts. At this time,
also tighten the wing bolts on the side column and
base.
Side Column
Position the sound column with its pitch inscription
facing forward, and attach the sound column to
the hanger bar.
Sound Column
Board Rest
Hanger Bar
Wire
Fixing Pin
Hanger Pin
Fixing Pin
Teflon Tube