Yamaha Clavinova CLP-670 Panduan Pemilik - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha Clavinova CLP-670. Yamaha Clavinova CLP-670 24 halaman. Clavinova
Juga untuk Yamaha Clavinova CLP-670: Panduan Pemilik (24 halaman), Panduan Pemilik (24 halaman), Panduan Pemilik (24 halaman)
Halaman Cetak
vana Clavinova emere um
TAKING CARE OF YOUR
CLAVINOVA
Your Clavinova is a fine musical instrument, and deserves the
most careful treatment. Observe the following points and your
Clavinova will sound and look great for many years.
1. Never open the case and touch or tamper with the internal
circuitry.
2. Always turn the POWER
switch OFF after use, and cover
the keyboard with the built-in key cover.
3. Clean the cabinet and keys of your Clavinova only with a:
clean, slightly damp cloth. A neutral cleanser may be used
if desired. Never use abrasive cleansers, waxes, solvents or
chemical dust cloths since these can dull or damage the finish.
4. Never place any vinyl products on your Clavinova. Contact
with vinyl can cause irreversable damage to the finish.
5. Install your Clavinova in a place that is away from direct
sunlight, excessive humidity or heat.
a
Never apply excessive force to the controls, connectors or
other
parts of your
Clavinova,
and avoid
scratching
or
bumping it with hard objects.
THE CONTROLS AND
CONNECTORS
@ POWER Switch
Press the POWER
switch once to turn the power ON, a
second time to turn the power OFF.
When
the power is
initially turned ON, the PIANO 1 voice selector LED will
light.
@ MASTER VOLUME Control
The MASTER
VOLUME
control adjusts the volume (level)
of sound produced by the Clavinova. The MASTER VOLUME
control also adjusts headphone volume when a pair of head-
phones is plugged into the HEADPHONE
jack (ij).
®© TRANSPOSER/MIDI
Button
The
TRANSPOSER/MIDI
button
allows
access
to the
Clavinova's
TRANSPOSE
function (to shift the pitch of
the entire keyboard up or down) and MIDI functions. For
details
refer to the *'TRANSPOSITION"
and
'MIDI
FUNCTIONS"
sections on pages 13 and 14, respectively.
@ Voice Selectors
The CLP-570
has seven voice selectors and the CLP-670
has ten. Simply press any of the voice selectors to select the
corresponding
voice. The LED
indicator above the voice
selector will light to indicate which voice is currently selected.
Note: The PIANO 1 voice is automatically selected whenever the
POWER
switch is initially turned ON.
@) BRILLIANCE
Control
This control can be used to change the tonality or ''timbre''
of the selected voice. It has three settings: MELLOW,
center
(NORMAL)
and BRIGHT.
The center setting produces the
*"*normal" tone of the selected voice. If you want a brighter
or *'sharper"' tone, slide the control to the BRIGHT position.
For a "rounder" more mellow tone, slide the control to the
MELLOW
position.
Note: The BRILLIANCE control has no intermediate settings. If you
slide the control to a position between
one of it's three
settings, the sound of the last setting will be retained.
(6) REVERB Control
The REVERB control provides a number of digital effects
that you can use for extra depth and expressive power.
Simply slide the REVERB
control to the required position:
OFF
No effect is produced.