Yamaha Clavinova CLP-840 Panduan Pemilik - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha Clavinova CLP-840. Yamaha Clavinova CLP-840 40 halaman. Clavinova

The Function Mode

III

CLP-840/820/820S Left Pedal Mode - - - - -

This function sets the left pedal for normal soft-pedal operation, for song start/stop opera

tion, or for sostenuto (CLP-820S only) operation. Use the [-/NO] and [+/YES] buttons to

select the desired left-pedal mode. "1" is the normal soft-pedal mode, "2" is the start/stop

mode, and "3" is the sostenuto mode (CLP-820S only). When the start/stop mode is selected,

the left pedal functions in the same way as the panel [START/STOP] button. Press the

[-/NO] and [+/YES] buttons simultaneously to recall the default setting "I".

iii

CLP-880/860 Pedal Functions - - - - - - -

After selecting "F

58",

press the [+/YES] button to engage the pedal functions sub-mode,

then use the FUNCTION [..... ] and [.... ] buttons to select the desired pedal functions, as listed

below.

J FS.1: Left Pedal Mo'de ............................................................................................................................

This function conveniently lets you set the left pedal for normal soft pedal operation, or for

song startlstop operation. Use the [-IN 0] and [+/YES] buttons to select the desired left

pedal mode. Press the [-INO] and [+/YES] buttons simultaneously to recall the default

setting" 1".

1: Soft

The left pedal functions as the soft pedal.

2: StarVStop

The left pedal functions in the same manner as the [START/STOP] button.

FS.2:

Damper Mode ...................................................................................................................................

This function lets you set how the damper pedal affects the sustain sound. There are two

modes for pedal operation.

1: Switch

In this mode the pedal acts as a simple on/off switch for sustain.

2: Continuous

In this mode the pedal continuously changes the amount of sustain (in eight

step gradations) i.e., the further down you press the pedal the longer the sound

sustains.

Use the [-/NO] and [+/YES] buttons to select the desired damper mode. Press the [-/NO]

and [+/YES] buttons simultaneously to recall the default setting "2".

FS.3:

Soundboard Depth .....................................................................................................................

Certain piano voices (GRAND PIANO, CLASSICAL PIANO, and JAZZ PIANO) feature

a special effect which recreates the ring of the strings and the soundboard resonance of an

actual acoustic piano when the damper pedal is pressed. This function lets you adjust the

depth of this effect. Use the [-/NO] and [+/YES] buttons to set the effect depth as required.

The effect depth range is from 0 through 20. A setting of "0" produces no effect, while a

setting of "20" produces maximum effect depth. Press the [-/NO] and [+/YES] buttons

simultaneously to recall the default setting "12".