Yamaha Clavinova CLP-860 Panduan Pemilik - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha Clavinova CLP-860. Yamaha Clavinova CLP-860 40 halaman. Clavinova
Halaman Cetak
follows:
CLP·8401
820/8205
F1
F2
F3
F4
F5
F6
F7
Fa
~r
~~
:>~
,'~
q
;:1
i
~~
" TEMPO ...
~
;1
g~
1
,
-!
~
• Operation Example
.~
:i
,~
.'
[F
3.
~]
i
+
Press [+IYES]
[£TIl ...
[,c 3. 7]
(sub-mode)
+
Use FUNCTION
[<0lIl],
[~]
[/-3.2]
+
Press
[-/NO]
or [+IYES]
once
[- :o] ...
~
... [
:0]
+
Use
[-/NO] ,
[+IYES]
5]
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
Clavinova extraordinary versatility. The functions are categorized in groups as
CLP·8801
860
F1
Tuning ............................................................. 28
F2
Scale ............................................................... 28
F3
Dual Mode Functions .................................... 29
F4
Split Mode Functions .................................... 30
Left Pedal Mode ............................................. 32
F5
Pedal Functions ............................................. 32
F6
Metronome Volume ........................................ 33
F7
Piano Song Part Cancel Volume .................. 33
Fa
l1li101 Functions ............................................... 34
F9
Backup Functions ...... .................................... 37
D
To Select a Function ... ...........................................................................
U
Press the [FUNCTION] button so that its indicator lights.
~
NOTE
I .
Functions cannot be selected during demolpiano song playback or when
the recorder is in operation.
~
Use the FUNCTION [....] and
[~]
buttons to select the desired
function: FI through F8 on the CLP-840/820/820S; FI through F9
on the CLP-880/860.
~
In the case of the Scale (F2), Dual Mode (F3), Split Mode (F4:
CLP-880/860), Pedal Functions (F5: CLP-880/860), MIDI (F7:
CLP-840/820/820S, F8: CLP-880/860), and Backup (F8: CLP-840/
820/820S, F9: CLP-880/860) functions, you will have to press the
[+/YES] button once to enter the respective sub-mode after the
function has been selected, and then use the FUNCTION [.... ] and
[~]
buttons again to select the desired sub-function.
~
NOTE
I .
The Dual or Split (CLP-8801860j mode must be engaged before the F3
and F4 functions can be selected, respectively.
If
the corresponding mode
is not engaged,
'~c
1- "
or
'~c
'-{ - " will appear on the display and the
corresponding sub-mode will not be available.
.• The Dual mode can be engaged while in the Function mode, but the
Function mode must be exited before the Split mode (CLP-8801860j can
be engaged.
!1
Set the function as required by using the [-/NO] and [+/YES]
buttons (see the individual function descriptions, below).
~
NOTE
I •
After selecting the function, the current setting will be displayed when the
[-INO} or [+IYES} button is pressed for the first time.
~
Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.