Yamaha Clavinova CVP-709 Manual Koneksi - Halaman 10

Jelajahi secara online atau unduh pdf Manual Koneksi untuk Alat Musik Yamaha Clavinova CVP-709. Yamaha Clavinova CVP-709 16 halaman. Iphone/ipad

Press the WPS button on your access point within two minutes after step 1 above.

When the connection to the wireless network is completed, the LED lamp of the adaptor lights, and

then flashes during communication over the network.

For details about the operations in the setting of the access point, read the owner's manual for the

NOTE

product you are using.

The necessary information is automatically set, and the connection between access point and the

instrument has been completed. Proceed to step 6 on

iPad. If you cannot set by WPS, follow the instructions in "Displaying the Networks in the Wireless LAN

and Connecting to the Network."

Displaying the Networks in the Wireless LAN and Connecting to the Network

You can connect the instrument to the Network by selecting it in the wireless LAN display on the

instrument. For more information on displaying networks in the wireless LAN display of the instrument,

refer to the Owner's Manual or the Reference Manual of your instrument.

Display the Networks in the wireless LAN display of the instrument.

For example, on the CVP-609/CVP-605: Menu  [Wireless LAN]

If no signal from the access point is received, the access point cannot be listed. Also, closed access

NOTE

points cannot be listed.

Connect the instrument to the access point.

From the Networks listed on the display, select the desired one. For a network with a lock icon ( ),

you need to enter the password, and for the network without the lock icon, you can connect the

network only by selecting it.

When connection is done successfully, "Connected" is shown at the top of the display, and the icon

shown below appears according to the signal strength.

iPhone/iPad Connection Manual

page 12

Strong

Press the WPS button on your

access point.

to connect the access point and iPhone/

Weak