Yamaha DM 2000 Version 2 Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Musik Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 14 halaman. Version 2
Juga untuk Yamaha DM 2000 Version 2: Panduan Pemilik (44 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (22 halaman), Panduan Instalasi Perangkat Lunak (13 halaman), Panduan Pemilik (1 halaman), Panduan Tambahan (4 halaman), Panduan Pemilik (37 halaman), Setup Manual (35 halaman), Panduan Orientasi (8 halaman), Manual Redundansi (8 halaman), Panduan Pemilik (3 halaman), Panduan pemasangan sistem operasi (Jerman) (13 halaman)

Yamaha DM 2000 Version 2 Panduan Instalasi
29
When the installation is complete, the following
window opens.
30
Remove the check mark from the [Start online
user registration] check box, then click [Finish].
We recommend that you access the following web page
from a computer connected to the Internet and register
the product. User registration entitles you to additional
information and support.
http://www.yamahaproaudio.com/register/
NOTE: After the installation is complete, the registration code and
access key will become invalid. To avoid problems that may occur
during re-installation, after the installation is complete, delete the
text files that contain the registration code and access key.
31
Turn off the power to the console, then turn it
on.
The console starts in normal mode.
32
Access the EFFECT LIBRARY page, and verify
that the Add-On Effects you purchased are
displayed and that you are able to recall them.
The installation is now complete.
NOTE: If you want to continue installing other add-on effects,
you must power-cycle the console and repeat the procedure from
step 2.

Direct De-authorization

If you wish to move the license of the Add-On Effects from
one console to another, you must first de-authorize the
license on the current console. If you can access the Internet
directly from your computer, follow the steps below to de-
authorize the software. See page 10 if you access the Internet
from a different computer.
Follow Steps 1 through 6 (on page 5) for direct installation,
then proceed with the following.
7
Select [De-authorize], then click [Next].
The following window opens.
8
Select [Create unregistration code], then click
[Next].
The following window opens.
9
Enter the PRODUCT ID, then click [Next].
The I/O port setting window opens.
Add-On Effects Installation Guide
9