Yamaha DTX530K Panduan Pemilik - Halaman 26
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha DTX530K. Yamaha DTX530K 48 halaman. Drum trigger module
Juga untuk Yamaha DTX530K: Panduan Perakitan (1 halaman)
Halaman Cetak
7
Create Your Own Original Drum Kit
The DTX500 lets you create your own original Drum Kit by assigning your favorite Drum Voice to
each pad and setting its tuning, pan, decay, reverb, etc.
* Drum Voice: Mainly individual percussion/drum sounds that are assigned to each of the pads.
* Drum Kit: A collection of Drum Voices assigned to pads.
1
Select a Drum Kit
Press the [DRUM KIT] button to view the Drum Kit Select
display (KIT1).
Rotate the jog dial to select the Drum Kit you want to use as a
starting point for your original Drum Kit. A good idea is to
select a Drum Kit that is close in sound to the type of kit you
intend to create.
* Preset Drum Kits (1–50) and user Drum Kits (51–70) can be
used for editing as well.
2
Assign Drum Voices
In this example, we'll create a bass drum (kick) sound.
>
2-1.
Press the [
page (KIT2).
2-2.
To select the pad (trigger input source) you want to
edit, simply hit the pad you want to edit or use the
[SHIFT] + [
Step on the kick pedal or press the [SHIFT] + [
>
[
] buttons and select "äkick." Now the pad that is
connected to the 8KICK Trigger Input Jack is
selected. In other words, the kick pedal's pad input is
selected.
26
DTX500 Owner's Manual
KIT1~~~ååååååååå
1~:Oak~Custom~~‚
] button to view the Drum Voice Select
KIT2~~~ƒsnare~~˙
"S01:OakCustom~‚
<
>
]/[
] buttons.
Pad to be edited
KIT2~~~äkick~~~˙
"K01:OakCustom~‚
● About the Trigger Input Sources
The Input Source indicates the trigger data that is transmitted by the pads
or drum triggers (Yamaha DT20, etc.) that are connected to trigger input
jacks 1SNARE to 8KICK/ 9 of the DTX500.
When mono pads TP65, KP125W/125/65, PCY65/130, DT10/20, etc. are
used, one Input Source is assigned to one input jack. When stereo pads
RHH135/130, PCY65S, etc. are used, two Input Sources (pad input and
rim switch input or 2 kinds of pad inputs, etc.) are assigned to one input
jack.
When three-zone pads XP100T/100SD/120T/120SD, TP65S, TP120SD/
100, PCY155/150S/135/130SC, etc., are used, three Input Sources (pad
input and two rim switch inputs, etc.) will be assigned to one input jack.
Each Input Source is defined as follows.
Pad input for 1SNARE jack.
ƒsnare
Open rim switch input for 1SNARE jack.
ƒsnrOp
Closed rim switch input for 1SNARE jack.
ƒsnrCl
Pad input for 1SNARE jack with the snares off.
ƒsnrOff
ƒsnrOfOp
Open rim switch input for 1SNARE jack with the
snares off.
Closed rim switch input for 1SNARE jack with the
ƒsnrOfCl
snares off.
Pad input for 2TOM1 jack.
™tom1
Pad input for 3TOM2 jack.
£tom2
Pad input for 4TOM3 jack.
Ωtom3
Pad input for 5RIDE jack.
•ride
•rideE
Edge rim switch input for 5RIDE jack.
•rideC
Cup switch input for 5RIDE jack.
Pad input for 6CRASH jack.
öcrash
Edge rim switch input for 6CRASH jack.
öcrashE
Cup switch input for 6CRASH jack.
öcrashC
Pad input for 7HI HAT jack when the hi-hat controller
ühhOp
<
]/
is open.
Edge rim switch input for 7HI HAT jack when the hi-
ühhOpE
hat controller is open.
Pad input for 7HI HAT jack when the hi-hat controller
ühhCl
is closed.
ühhClE
Edge rim switch input for 7HI HAT jack when the hi-
hat controller is closed.
ühhFtCl
Input when the hi-hat controller is pressed (foot close).
ühhSplsh
Foot splash input of the hi-hat controller.
äkick
Pad input for 8KICK jack.
"pad9
Pad input for 8PAD 9 jack.
Pad input for 2PAD 0 jack.
ƒπpad10
Pad input for 3PAD ! jack.
ƒƒpad11
Pad input for 4PAD @ jack.
Īpad12
* Mono pads do not have a rim switch function.