Yamaha PortaTone PSR-640 Panduan Servis - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Servis untuk Alat Musik Yamaha PortaTone PSR-640. Yamaha PortaTone PSR-640 18 halaman.
Juga untuk Yamaha PortaTone PSR-640: Prosedur Langkah Demi Langkah (21 halaman)
Halaman Cetak
PSR-740/PSR-640
ALERT MESSAGE LIST
No file on disk!
Insert another disk.
Unformatted disk!
Disk error!
Disk write-protected!
Disk file protected!
Can't copy or record
this file.
No disk!
Insert a disk.
Disk removed!
Disk full!
Cannot continue.
Wrong disk!
Reinsert
the proper disk.
Same name on disk!
Change the file name.
Cannot record!
Maximum of 60 songs
can be recorded.
Memory full!
Cannot continue.
30
The disk contains no file to be loaded, copied, or be deleted.
Insert the disk that contains files to be loaded, copied, or deleted.
An unformatted disk is inserted.
An error occurred during execution of a disk operation.
Try changing the disk.
This message also may appear when executing the Load operation if the
internal memory becomes full.
The floppy disk's write-protect tab is set to ON.
Remove the disk, set write-protect to off, re-insert the disk and attempt the
operation again.
The file is a purposely "copy-protected" disk.
The Copy function is not possible.
There is no floppy disk inserted into the disk drive.
Insert a disk.
An error occured because the disk was removed during a disk operation.
Never remove a disk during a disk operation since this could damage both
the disk and the drive.
The disk's memory capacity is full and no additional data can be recorded.
Delete one or more unneeded songs (using Delete), and attempt the
operation again.
When using the Copy operation, the inserted disk is different from the
source or destination disk.
Remove the disk and re-insert the proper Disk.
More than one file has the same name on the disk.
Change the name.
Maximum of 60 songs can be recorded.
Delete one or more unneeded songs (using Delete), and attempt the song
recording again.
If the internal memory becomes full during Style/Pad recording, this
message will appear on the display and recording will stop.