Yamaha SILENT Bass SLB300 Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha SILENT Bass SLB300. Yamaha SILENT Bass SLB300 23 halaman.
Juga untuk Yamaha SILENT Bass SLB300: Panduan Pemilik (24 halaman)

Yamaha SILENT Bass SLB300 Panduan Pemilik
• The height of the bridge for the SILENT Bass
adjusted. Turn the metal adjusters clockwise to lower
the bridge, and counter-clockwise to raise it. [Fig. 3]
NOTICE
• Before adjusting the bridge height, loosen the strings in order to relieve pressure on the adjusters and
make it easier to rotate the adjusters. Rotating the adjusters with without reducing string tension can
result in damage to the bridge or strings, etc.
• When adjusting the bridge height, make sure that the height of both legs is kept the same. Increasing
string tension on legs that are unequal in height can result in poor surface contact of the bridge's feet,
causing inferior sound quality, noise, damage to the bridge, etc. (Fig. 3 *3).
• The strings are tuned to the following pitches. The 1st
string is tuned to G, the 2nd string to D, the 3rd string
to A, and the 4th string to E. Use a piano, tuning fork,
tuner, etc., and adjust the pitch of each string using the
tuning pegs.
 Tuning machine tension adjustment
The tuning machine tension regulates the amount of pressure
required to turn the tuners and can be adjusted using the sup-
plied Allen wrench.
• If the tuning machine turns with very slight pressure
 Rotate the adjustment screw to the right (clockwise: A).
• If the tension is tight and the tuning machine is hard
to turn
 Rotate the adjustment screw to the left (counter-clock-
wise: B).
13
SLB300 Owner's Manual
TM
can be
[Fig. 3: Adjusting bridge height]
*3
*3 Adjust to the same height.
Lower pitch
Raise pitch
2nd string (D)
1st string (G)
3rd string (A)
Metal adjusters
Higher
Counter-
clockwise
Clockwise
*3
Lower
4th string (E)
A
B