Yamaha SILENT Violin YSV104 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha SILENT Violin YSV104. Yamaha SILENT Violin YSV104 14 halaman.

Tuning and Changing the Strings

Because the bridge includes a built-in pickup, which is connected to the body with a thin

cable, the instrument ships from the factory with the bridge laying down. First, set up the

bridge and then proceed with tuning. As the strings get old, sound quality will gradually

decrease, and it will become difficult to tune the instrument. Change the strings as soon as

you think they are getting old.

WARNING

• The ends of the strings are sharp and can cut fingers. Use caution when changing strings.

• When changing or adjusting strings, do not put your face close to the instrument. The string may

suddenly break resulting in eye or other unexpected injuries.

• The lower side of the bridge supports the 1st

string (E), the higher side supports the 4th string

(G). Please note the bridge orientation and cen-

ter the bridge over the pickup cable hole as

shown in the illustration below.

Pickup cable

• Ensure that the bridge stands vertically. If it leans to one side, use both hands to adjust. Make sure

that each string passes over the corresponding grooves in the bridge.

Wrong

Body

Bridge

Correct

Wrong

Tailpiece

Vertical

Groove

4th string

Pickup cable

* The illustrations show

Hole

Place the bridge vertically.

1st string

the view looking from

the tailpiece.