Yamaha Sonogenic SHS-500 Panduan Referensi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Referensi untuk Alat Musik Yamaha Sonogenic SHS-500. Yamaha Sonogenic SHS-500 28 halaman.
Juga untuk Yamaha Sonogenic SHS-500: Panduan Pemilik (45 halaman)
Halaman Cetak
How to Use the Terminals
3
[LINE OUT] for higher performance levels
For connecting a powered speaker or a mixing console for playing in larger venues at higher
volume (with 1/4" mono phone plug). The sound connected to the instrument's [AUX IN] jack is
output at the same time.
For the best sound, set the Function "EQ Type" setting
[LINE OUT] terminal.
NOTICE
• To avoid possible damage, first turn on the power to the instrument, then to the external device. When
turning off the power, first turn off the power to the external device, then to the instrument. Since this
instrument's power may automatically be turned off due to the Auto Power Off function
off the power to the external device, or disable Auto Power Off when you do not intend to operate the
instrument.
• Do not route the output from the [LINE OUT] jack to the [AUX IN] jack. If you make this connection, the
signal input at the [AUX IN] jack is output from the [LINE OUT] jack and then back again, creating a
feedback loop that could make normal performance impossible, and may even damage the equipment.
NOTE
• The instrument's built-in speaker continue to output the same sound as the [LINE OUT] jack when external devices
are connected to this jack.
• The output volume from the [LINE OUT] jack does not change when adjusting the [VOLUME] dial on the instrument.
• Use an appropriate adaptor plug if the input jack of the powered speaker does not match the phone plug of the
audio cable.
• Use audio cables and adaptor plugs having no (zero) resistance.
SHS-500
8
(page
3) to "LineOut" when using the
1/4" mono phone plug
LINE OUT
Powered speaker
Audio cable
(page
5), turn