Yamaha TENORI-ON TNR-W Panduan Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Alat Musik Yamaha TENORI-ON TNR-W. Yamaha TENORI-ON TNR-W 29 halaman.

Performance in the Score Mode

Press an LED button briefly to play the sound assigned to it. At the

same time the lights will flash outward from the played sound. If you

hold the LED button a bit longer it will remain lit and will become an

active note that will play repeatedly. Press and hold an active note to

de-activate it.

The loop indicator will be continuously cycling from the left to right

edge of the LED button matrix. Active notes will play when the loop

indicator coincides with their positions on the matrix.

Press the [CLEAR] button to de-activate all active notes.

Active notes will play and flash when

the loop indicator passes over them.

Master Volume Adjustment

To adjust the overall volume of the TENORI-ON, rotate the jog dial

while holding the [R4] function button. The volume setting will appear

in the LCD display.

This volume setting is temporary. Refer to page 43 in the TENORI-ON Manual (pdf file) for

details on setting the overall "hardware" volume.

Increase

Volume

Jog Dial

Decrease

Volume

Pausing Loop Playback

Press the [OK] button while the highlighted "STOP" indicator in the

lower right corner of the LCD display is shown to temporarily pause

[CLEAR] Button

loop playback. The loop indicator will stop at the position at which

the [OK] button is pressed, and the highlighted "STOP" indicator will

change to "START." Press the [OK] button a second time and loop

playback will resume from the point at which it was paused.

V�l��

∞

��01�

M�s��

: 127

Current loop indicator position.

Press and hold

the [R4] button.

Layer Volume

Master Volume

[OK] Button