Yamaha YDP-101E Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha YDP-101E. Yamaha YDP-101E 48 halaman. Yamaha digital piano owner's manual

Halaman Cetak

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,

short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts.

If it should appear to be malfunctioning, discontinue use immediately and

have it inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill

into any openings.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden

loss of sound during use of the instrument, or if any unusual smells or

smoke should appear to be caused by it, immediately turn off the power

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy

objects on it, or place it in a position where anyone could walk on, trip over,

or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always

hold the plug itself and not the cord. Pulling by the cord can damage it.

• Do not connect the instrument to an electrical outlet using a multiple-con-

nector. Doing so can result in lower sound quality, or possibly cause over-

heating in the outlet.

• Remove the electric plug from the outlet when the instrument is not to be

used for extended periods of time, or during electrical storms.

• Before connecting the instrument to other electronic components, turn off

the power for all components. Before turning the power on or off for all

components, set all volume levels to minimum.

• Do not expose the instrument to excessive dust or vibrations, or extreme

cold or heat (such as in direct sunlight, near a heater, or in a car during the

day) to prevent the possibility of panel disfiguration or damage to the inter-

nal components.

• Do not use the instrument near other electrical products such as televisions,

radios, or speakers, since this might cause interference which can affect

proper operation of the other products.

• Do not place the instrument in an unstable position where it might acciden-

tally fall over.

• Before moving the instrument, remove all connected cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning fluids, or chemical-impregnated wiping cloths. Also, do

not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do

not use excessive force on the buttons, switches or connectors.

• Take care that the key cover does not pinch your fingers, and do not insert a

finger or hand in the key cover gap.

(1)B_EL/CL-3vari.

PRECAUTIONS

• Only use the voltage specified as correct for the instrument. The required

• Before cleaning the instrument, always remove the electric plug from the

• Check the electric plug periodically and remove any dirt or dust which may

• Never insert or drop paper or metallic or other objects between the slits of

• Do not place the instrument against a wall (allow at least 3 cm/one-inch

• Read carefully the attached documentation explaining the assembly pro-

• Do not operate the instrument for a long period of time at a high or uncom-

IUSING THE BENCH

• Do not play carelessly with or stand on the bench. Using it as a tool or step-

• Only one person should sit on the bench at a time, in order to prevent the

• If the bench screws become loose due to extensive long-term use, tighten

ISAVING USER DATA

• Save all data to an external device such as the Yamaha MIDI Data Filer MDF3,

Always turn the power off when the instrument is not in use.

* The illustrations and LCD screens as shown in this owner's manual are for instruc-

switch, disconnect the electric plug from the outlet, and have the instrument

inspected by qualified Yamaha service personnel.

voltage is printed on the name plate of the instrument.

outlet. Never insert or remove an electric plug with wet hands.

have accumulated on it.

the key cover and the keyboard. If this happens, immediately turn off the

power and remove the electric plug from the outlet and have the instrument

inspected by qualified Yamaha service personnel.

from the wall), since this can cause inadequate air circulation, and possibly

result in the instrument overheating.

cess. Failure to assemble the instrument in the proper sequence might re-

sult in damage to the instrument or even injury.

fortable volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

ladder or for any other purpose might result in accident or injury.

possibility of accident or injury.

them periodically using the included tool.

in order to help prevent the loss of important data due to a malfunction or

user operating error.

Yamaha cannot be held responsible for damage caused by improper use or modi-

fications to the instrument, or data that is lost or destroyed.

tional purposes only, and may be different from the ones on your instrument.

YDP-101