Yamaha YDP-123 Panduan Pemilik - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha YDP-123. Yamaha YDP-123 44 halaman. Digitalpiano
Juga untuk Yamaha YDP-123: Panduan Pengoperasian Cepat (2 halaman), (Bahasa Prancis) Mode D'emploi (44 halaman), Petunjuk pengoperasian (Bahasa Jerman) (44 halaman)

Troubleshooting

Problem

The YDP-123 does not turn on.

A click or pop is heard when the power is

turned on or off.

Noise from the speakers or headphones is

audible.

The overall volume is low, or no sound is

heard.

The damper pedal has no effect, or the sound

continuously sustains even when the damper

pedal is not pressed.

Options & Expander Modules

Options

BC-100 Bench

A comfortable bench styled to match your Yamaha YDP-123.

HPE-160 Stereo Headphones

High-performance lightweight dynamic headphones with extra-soft ear pads.

Troubleshooting/Options & Expander Modules

YDP-123

Possible Cause and Solution

The YDP-123 has not been plugged in properly. Securely insert the female plug into

the socket on the YDP-123, and the male plug into a proper AC outlet (page 11).

This is normal when electrical current is being applied to the instrument.

The noise may be due to interference caused by the use of a mobile phone in close

proximity to the YDP-123. Turn off the mobile phone, or move it further away from the

YDP-123.

• The Master Volume is set too low. Set it to an appropriate level using the [MASTER

VOLUME] control.

• Make sure a pair of headphones is not connected to the headphones jack.

• Make sure that Local Control (page 26) is ON.

The pedal cord may not be properly connected. Make sure to securely insert the pedal

cord into the [PEDAL] jack (page 30).