Yamaha YG-2500 Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha YG-2500. Yamaha YG-2500 12 halaman. Concert glockenspiel
Juga untuk Yamaha YG-2500: Panduan Pemilik (13 halaman), Panduan Pemilik (13 halaman), Panduan Pemilik (13 halaman)

Halaman Cetak

TO GET THE MOST OUT OF YOUR INSTRUMENT

Please read the following instructions carefully before using your glockenspiel.

N Installation Location

Use or storage in the following locations may cause damage, even when packaged.

• In direct sunlight, such as near a window, or in a closed vehicle in daytime.

• Near heating devices or in other locations subject to excessive heat.

• In excessively cold environment.

• In places with excessive humidity or dust.

• Locations subject to vibrations.

N Handling

• Placing objects on or leaning against the instrument can damage the tone bars or the side frame.

This can also lead to the instrument falling over, etc. as described in the "Precautions" section. Never

do this as it is very dangerous.

• Do not use the glockenspiel's mallets on a vibraphone, metalphone, etc. It can dent the tone bars or

cause damage, which can result in poor pitch.

N Transporting the Instrument

• When transporting the disassembled instrument, remove the tone bars and resonator pipes from the

glockenspiel and wrap them in a soft blanket, etc. for transport.

• When moving the instrument with its casters, make sure you adjust the instrument's height to its

lowest level. This puts the instrument's center of gravity at a lower point for greater stability while

moving.

• The instrument is sensitive to impacts. Treat the instrument with care when moving. Never drop or

throw the instrument.

• If it is necessary to lift the instrument while moving it, always do so with at least two persons and

using both hands to hold the side frames or legs. The instrument weighs about 36 kilograms.

N Maintenance

• The tone bars should be polished from time to time using a soft and dry cloth. Never use thinner or

benzene or a wet cloth for cleaning purpose.

N Keep This Manual for Future Reference

• After reading, make sure to keep the manual in a safe place.

• When assembling/disassembling the instrument, make sure to follow the procedure outlined in this

manual. Assembly in the wrong order can cause the pipes to drop which may result in an injury,

impair the performance functionality of the instrument or cause noise.

• After final adjustment of the legs the fixing screws must be tightened securely to prevent loosening.

Looseness may cause the instrument to shift during performance and can also cause noise and

other problems. Retighten the screws from time to time.

Assembly Cautions