Yamaha YM-4600A Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha YM-4600A. Yamaha YM-4600A 14 halaman. Concert marimbas
Juga untuk Yamaha YM-4600A: Panduan Pemilik (12 halaman), Panduan Pemilik (16 halaman)

Halaman Cetak

ASSEMBLY

1-2. Connect the reinforcement stays at the center. Align the end of the fixing bolt and the holes in the

reinforcement stays and tighten the fixing bolt securely.

1-3. Install the reinforcement stay to the large end leg.

Insert the "E" marked end of the reinforcement stay (with its slant shaft facing down) into the joint

(marked with "E") on the large end leg until it stops and tighten the fixing bolt securely.

In the same way, install the reinforcement stay to the small end leg. (There is no marking on the

small end joint.)

Leg (Large end)

1-4. After making sure that both legs are perpendicular to the floor, fit the end of each slant shaft to the

wing nut located in the lower part of each leg and tighten it securely.

* Make sure that the slant shaft is securely fitted.

Reinforcement stay

(Large end)

Leg (Large end)

Screw hole

Reinforcement stay (Large end)

Fixing bolt

Slant shaft

Wing nut

Reinforcement stay

(Small end)