Yamaha YPP-50 Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha YPP-50. Yamaha YPP-50 20 halaman. Yamaha personal electronic piano owner's manual

Halaman Cetak

Setting the Personal Electronic Piano MIDI Channels

1. Press and hold the MIDI/TRANSPOSE button.

2. Press the key on the keyboard corresponding to the desired

MIDI transmit or receive channel.*

3. Release the MIDI/TRANSPOSE button.

* Keys C

through D#

on the keyboard are used to set the MIDI

transmit channel, and keys C

OMNI mode OFF and set the MIDI receive channel as shown in

the illustration below. The E

and basic receive channel 1.

Note: When the power is initially turned ON, MIDI receive is set

to the OMNI mode and the transmit channel is set to 1.

MIDI FUNCTION CHART

Function

Local ON/OFF

Program Change ON/OFF

Control Change ON/OFF

Multi-Timbre Mode

Split & Left Local OFF

Split & Right Local OFF

Panel Data Transmit

The MIDI functions listed above are engaged by holding down the

MIDI/TRANSPOSE button and pressing the corresponding voice

selector. Full details are given in the following pages.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the Personal

Electronic Piano keyboard controls its internal tone generator,

allowing the internal voices to be played directly from the key-

board. This situation is "Local Control ON" since the internal

tone generator is controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the Personal

Electronic Piano keyboard does not play the internal voices,

but the appropriate MIDI information is still transmitted via

the MIDI OUT connector when notes are played on the key-

board. At the same time, the internal tone generator responds

to MIDI information received via the MIDI IN connector. This

means that while an external MIDI sequence recorder such as

the Yamaha EMQ-1 Memory Box, for example, plays the Per-

sonal Electronic Piano's internal voices, an external tone genera-

tor such as the EMT-l can be played from the Personal Elec-

tronic Piano keyboard.

through D#

are used to turn the

key sets the OMNI receive mode

Voice Selector*

PIANO

E.PIANO

HARPSI

VIBES

STRINGS

BRASS

P.ORGAN

Turning Local Control ON or OFF

1. Hold down the MIDI/TRANSPOSE button.

2. Press the PIANO voice selector. If the PIANO LED is lit

when the PIANO voice selector is pressed; you have turned

local control OFF. If the PIANO LED is not lit when the

PIANO voice selector is pressed, you have turned local con-

trol ON.

3. Release the MIDI/TRANSPOSE button.

Program Change ON/OFF

Normally the Personal Electronic Piano will respond to MIDI

program change numbers received from an external keyboard

or other MIDI device, causing the correspondingly numbered

Personal Electronic Piano voice to be selected. The Personal

Electronic Piano will normally also send a MIDI program change

number whenever one of its voices is selected, causing the cor-

respondingly numbered voice or program to be selected on the

external MIDI device if the device is set up to receive and res-

pond to MIDI program change numbers.

This function makes it possible to cancel program change number

reception and transmission so that voices can be selected on

the Personal Electronic Piano without affecting the external

MIDI device, and vice versa.

1. Hold down the MIDI/TRANSPOSE button.

2. Press the E.PIANO voice selector. If the E.PIANO LED is

lit when the E.PIANO voice selector is pressed, you have

turned program change reception/transmission OFF. If the

E.PIANO LED is not lit when the E.PIANO voice selector

is pressed, you have turned program change reception/trans-

mission ON.

3. Release the MIDI/TRANSPOSE button.

Control Change ON/OFF

Normally the Personal Electronic Piano will respond to MIDI

control change data received from an external MIDI device or

keyboard, causing the selected Personal Electronic Piano voice

to be affected by pedal and other "control" settings received

from the controlling device. The Personal Electronic Piano also

transmits MIDI control change information when either of its

pedals are operated.

This function makes it possible to cancel control change data

reception and transmission if you do not want the Personal

Electronic Piano voices to be affected by control change data

received from an external device or vice versa.

1. Hold down the MIDI/TRANSPOSE button.

2. Press the HARPSI voice selector. If the HARPSI LED is

lit when the HARPSI voice selector is pressed, you have

turned control change reception/transmission OFF. If the

HARPSI LED is not lit when the HARPSI voice selector is

pressed, you have turned control change reception/trans-

mission ON.

3. Release the MIDI/TRANSPOSE button.