Yamaha ARIUS YDP-S55 Panduan Pemilik - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Papan Ketik Elektronik Yamaha ARIUS YDP-S55. Yamaha ARIUS YDP-S55 48 halaman.
Juga untuk Yamaha ARIUS YDP-S55: Panduan Pengoperasian Cepat (2 halaman), Referensi Midi (4 halaman)

Halaman Cetak

YDP-S55, YDP-S35 Assembly

You can watch a video of the assembly.

Scan the QR code at left or access the

website below.

https://4wrd.it/ydp_assembly_video2

Check if you have all of the items indicated below.

NOTICE

Make sure to place the main unit on the polystyrene foam

pads that have been removed from the packages. Position the

pads so that they will not contact the connector panel on the

bottom of the main unit.

Main unit

Polystyrene foam pads

Connector panel

Cord holder

Back board

Side

board (L)

× 2

Flat head screws

(6 × 20 mm)

× 4

(YDP-S55)

× 2

(YDP-S35)

Thin screws (4 × 12 mm)

× 2

Tapping screws (4 × 20 mm)

Anti-fall bracket (L)

* The anti-fall brackets are not for earthquake countermeasures.

YDP-S55

Front board

AC adaptor

* The adaptor may not be included, or may look different from the

illustration above, depending on your particular area.

Side

board (R)

Pedal box

× 2

Caps

× 4

Long screws (6 × 25 mm)

× 4

Thick screws (6 × 16 mm)

Anti-fall bracket (R)

YDP-S35

AC adaptor

Power cord

Align the side boards with each end

of pedal box, and lightly tighten with

flat head screws (6 × 20 mm) for

temporary fastening.

These screws will be tightened securely later in

step 3.

Leave the pedal cord out on the back side of the

instrument.

Side

board

(L)

Attach the back board.

Depending on the model, the surface color of one

side of the back board may be different from the

other side. In this case, position the back board so

that the side facing the front (pedal side) matches

the color of the main unit.

2-1

Attach the top of the back board by

temporarily fastening the thin screws (4 ×

12 mm).

2-2

While pushing the lower part of the side

board from the outside, fix the lower side of

the back board on both sides with long

screws (6 × 25 mm). Also, fix the anti-fall

brackets together here.

2-3

Secure the remaining two places on the

lower side with tapping screws (4 × 20 mm).

YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual

Keyboard Stand Assembly

Pedal box

Side

board

(R)

Flat head screws

× 2

(6 × 20 mm)