DirectConnect DCC5H Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang DirectConnect DCC5H. DirectConnect DCC5H 4 halaman. High speed hdmi single cat5e/6 extender

Halaman Cetak

2.0 F

EATURES

This high-performance DirectConnect

stand inside UTP cable has many benefits and features that enable it to perform in a

superior manner. Among those benefits and features you will find:



HDMI™ cable length is fixed and unchangeable after it is produced.

connectors can only be soldered or terminated by the professional

manufacturers that produce them, the installer and/or users cannot modify by

themselves. However Cat5e or Cat6 with cross stand inside UTP cable is

readily available and may be processed easily by the installer and /or end user.



HDMI™ cables are not easy to bend and the connectors are large to pull

through conduit and the wall. However, Cat5e/6 cable has no such problems.



Uses Cat5e or Cat6 with cross stand inside UTP cable to substitute for HDMI™

cable to achieve long distance transmission without signal loss.



Auto-adjustment of feedback, equalization and amplification.



Supports up to1080p, uncompressed 2 channel audio, and IEEE-568B standard.

3.0 P

ACKAGE

ONTENTS

Before attempting to use this DirectConnect

make sure the following items are contained in the shipping carton:

DirectConnect

HDMI™ Extender One



Two

5 Volt DC Power Adapters



(2)



User's Manual

Note: Please retain the original packing material in case you need to return the unit. If you

find any items missing, contact DirectConnect

the model number, serial number, and invoice available for reference when you call.

4.0 C

ONNECTION AND

PERATUION

Connect the HDMI™ signal source to the sender unit input port

* Please refer to connection diagram section

Connect a single Cat-5e or Cat6 with cross stand inside UTP cable between

the transmitter and receiver units. Please use EIA/TIA-568 termination (T568B).

Connect the HDMI™ display device to the receiver unit output port

Insert the DC side of the 5v power supply into the transmitter and receiver

before connecting to the wall outlet. Then connect the AC side of the power

supply into the wall outlet

(ideally the AC power should be surge suppressed and filtered)

Attention:

Insert/Remove cables gently & avoid twisting/kinking your HDMI™ cables.

Extender via CAT5e or CAT6 with cross

unit, please check the packaging and

Transmitter and one

Receiver

(1)

immediately (800.531.3224). Please have

(HDMI™ IN)

(Page 5)

(HDMI™ OUT)

4 / 8

4.1 P

ANEL

ESCRIPTIONS

HDMI™ Extender Transmitter

HDMI™

1 - HDMI™ Input

HDMI™ Extender Receiver

3 - HDMI™ Output

Please use EIA/TIA-568 termination (T568B) and do not apply DC power to unit until all connections are complete.

4.2 C

ONNECTION

Please Note: HDMI™ Cable length

should be 6 feet or less

1080P Single Cat6 164 feet

Note: In order to achieve the highest transmission quality, please choose unshielded Cat5e or Cat6

and terminate with metal RJ-45 connectors

require low skew cables for the best performance.

1. The cables with lower quality will not achieve the perfect transmission effect and long distance.

2. Theoretically the function of this product is normal when adopting short distance transmission.

If this product cannot transmit long distance, there may be quality problems in the transmission cables.

2 - Cat5 Output

4 - DC Power Input

2 – Cat5 Input

4 – DC Power Input

IAGRAM

(50 meter)

Higher-resolutions and longer transmission distances

5 / 8