Yamaha Electone Stagea Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Papan Ketik Elektronik Yamaha Electone Stagea. Yamaha Electone Stagea 6 halaman.

Halaman Cetak

Preparing to download the

version update data

Make sure that you have an appropriate SmartMedia

card or USB ﬂash memory device, formatted for use

on the STAGEA, and having enough free space for the

version update data.

* If a previous version update data has already been

loaded to SmartMedia or USB ﬂash memory, the

version update data on the media/device will be

deleted and replaced with the new data.

■ For those using USB ﬂash memory

for updating

If the current version of your STAGEA is earlier than

1.60, installing the version update data is not possible

by using USB ﬂash memory. Start the operation by

ﬁrst checking the version of your STAGEA and

making sure that the version is 1.60 or later.

Check that the USB memory device (other USB ﬂash

memory or USB-FDD, etc.) is not connected and

that a SmartMedia card is not inserted to/in the

STAGEA.

• No USB memory device is connected and no

SmartMedia card is inserted.

There is no problem. Go on to the download

operation.

• SmartMedia card is inserted.

Please pull out the SmartMedia card until the

installation is completed.

• USB memory device is connected.

Please disconnect it until the installation is

completed. As for a USB-FDD (ﬂoppy disk drive),

as long as a ﬂoppy disk is not inserted, there is no

problem.

* We recommend that you connect USB ﬂash

memory directly to the STAGEA, and not via a

USB hub.

■ If there is not enough empty capacity

in SmartMedia or USB ﬂash memory

• You can delete unnecessary data (registration data,

etc.) with the STAGEA.

• If you don't have the appropriate SmartMedia card

or USB ﬂash memory, you'll have to purchase it.

Please use the SmartMedia card or USB ﬂash

memory which has been formatted on the

STAGEA.

Downloading the version update

data

■ Method A

Using Internet Direct Connection

Cable / Wireless connection

(INTERNET)

Please access the Internet from the STAGEA and start

the operation from the top page.

Insert the SmartMedia or USB ﬂash memory in the

STAGEA and press "STAGEA's version upgrade",

then the download button on the display.

A "downloading..." message appears when the

download starts, and a "Download completed"

message is shown when the download has been

properly completed.

The time necessary for downloading differs depending

on your Internet connection and provider. In some

cases, this may take more than ten minutes.

For more information on using Internet Direct

Connection, refer to the STAGEA Owner's Manual.

Please go on to the next step when the download is

completed.

■ Method B

Using computer with Internet connection

(INTERNET)

* Only USB ﬂash memory is applicable on the ELS-

01/01C typeU.

• Download the update data to your computer

Windows:

Access

http://asia.yamaha.com/en/products/musical-

instruments/keyboards/electone/, select your model

(If you are using the ELS-01C or -01C typeU, select

"ELS-01C typeU." If you are using the ELS-01 or -01

typeU, select "ELS-01 typeU."), click 'Support' tab,

then download the version update data, and ﬁnally

save the ﬁle "els-01_01c_01x_v***.exe" ("v***"

SmartMedia card

STAGEA

USB flash memory