Yamaha PSR-E360 Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Papan Ketik Elektronik Yamaha PSR-E360. Yamaha PSR-E360 44 halaman.
Juga untuk Yamaha PSR-E360: Panduan Pemilik (25 halaman)

Halaman Cetak

Setting Up

Power Requirements

Although the instrument will run either from an AC adaptor or batteries, Yamaha

recommends use of an AC adaptor whenever possible. An AC adaptor is more

environmentally friendly than batteries and does not deplete resources.

Using an AC Adaptor

Connect the AC adaptor in the order shown in the illustration.

DC IN jack

(page 11)

WARNING

• Use the specified AC adaptor (page 35) only. Using the wrong AC adaptor can result in

damage to the instrument or overheating.

WARNING

• When using the AC adaptor with a remov-

able plug, make sure to keep the plug

attached to the AC adaptor. Using the

plug alone can cause electric shock or

fire.

• If the plug is accidentally removed from

the AC adaptor, slide it back in until it

clicks into place, taking care to avoid

touching any internal metal parts. To

avoid electric shock, short circuit or dam-

age, also be careful that there is no dust

between the AC adaptor and plug.

CAUTION

• When setting up the product, make sure that the AC outlet you are using is easily accessi-

ble. If some trouble or malfunction occurs, immediately turn the power off and disconnect

the plug from the outlet.

NOTE

• Follow the order shown above in reverse when disconnecting the AC adaptor.

PSR-E360 Owner's Manual

AC outlet

adaptor

Plug

Slide the plug

as indicated.

The shape of the plug differs depending

on your area.

Using Batteries

This instrument requires six "AA" size, Alkaline (LR6)/Manganese (R6) batter-

ies, or rechargeable nickel-metal hydride batteries (rechargeable Ni-MH batter-

ies). The Alkaline batteries or rechargeable Ni-MH batteries are recommended

for this instrument, since other types may result in poorer battery performance.

WARNING

• When the batteries run out, or if the instrument is not to be used for a long time, remove

the batteries from the instrument.

Make sure that the power of the instrument is off.

Open the battery compartment cover located on the instrument's bottom

panel.

Insert the six new batteries, being

careful to follow the polarity mark-

ings on the inside of the compart-

ment.

Replace the compartment cover,

making sure that it locks firmly in

place.

NOTICE

• Connecting or disconnecting the power adaptor with batteries installed may turn the

power off, resulting in loss of data being recorded at the time.

• Make sure to set the battery type correctly (page 35).

• When battery power becomes too low for proper operation, the volume may be reduced,

the sound may be distorted, and other problems may occur. When this happens, make sure

to replace all batteries with new ones or already recharged ones.