Yamaha HTR-5130RDS Panduan Pemilik - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Yamaha HTR-5130RDS. Yamaha HTR-5130RDS 42 halaman. Natural sound av receiver

Halaman Cetak

To listen to a source with Dolby Digital, DTS or other future format by reproducing the

decoded signals input at the 6CH DISCRETE INPUT terminals of this unit.

In step 3 on page 22, press either the DVD/LD or TV/DBS

button once or more so that "6ch" appears in the display.

Discrete signals from the component connected to the 6CH

DISCRETE INPUT terminals of this unit are selected as the

input signals.

DVD/LD

TV/DBS

2CH/6CH

TAPE/MD

PHONO

MONITOR

TV/DBS

VCR

2CH/6CH

UNER

PHONO

To stop listening to a decoded source with Dolby

Digital, DTS, or other future format

Press the DVD/LD or TV/DBS button again to switch the input

from six channel input to two channel input or select another

input source. When two channel input is selected, the 6CH

DISCRETE INPUT terminals are not used.

Notes on reproducing discrete signals with Dolby Digital,

DVD

DTS, or other future format:

2CH/

1. Your speaker system must include a center speaker.

2. Your speaker system should include a subwoofer.

* Connect a subwoofer which has a built-in amplifier

directly to the SUBWOOFER OUTPUT terminal of this

unit. For more details on hooking up a subwoofer to this

unit, refer to pages 10 and 12.

* If you do not have a subwoofer in your system, it may be

possible to make a setting on the Dolby Digital, DTS, or

other future format decoder to distribute LFE channel

signals to the right and left MAIN output terminals.

For details, refer to the owner's manual supplied with

your decoder.

Notes

When you switch to the "6ch" mode, the built-in digital sound

field processor (DSP) will not work and adjustments to delay

time settings cannot be made.

Switching this unit to the "6ch" mode will input no signal to

this unit if there is no connection made to the 6CH

DISCRETE INPUT terminals of this unit.