ABB AutoLink Petunjuk Pemasangan - Halaman 8

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Perangkat Perlindungan ABB AutoLink. ABB AutoLink 11 halaman. 15kv, 27kv, 38kv
Juga untuk ABB AutoLink: Buku Instruksi (12 halaman)

Halaman Cetak
ABB AutoLink Petunjuk Pemasangan
TEHI95094 – rev. 1
8 / 11
Figure 4
Place the cap, holding the tube with the hand, and tighten with a 34 mm fork spanner
(torque between 8 and 10 Nm) without damaging the O'Ring (Fig. 5).
Figure 5

6.4 AutoLink Repositioning

Push the interlocking bolt (Fig. 6) until blocked (it will spin freely, but it will not reset). Do
not strike the bolt, nor use any type of tool to reset.
Figure 6
Turn the tensioning device support (Fig. 7).
Place the tensioning device support facing the interlocking bolt.