Yamaha R-N500 Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Yamaha R-N500. Yamaha R-N500 20 halaman.
Juga untuk Yamaha R-N500: Pembaruan Firmware (4 halaman)

Halaman Cetak
Yamaha R-N500 Panduan Pemilik

PREPARATION

Connections

Connecting speakers and source components

CAUTION
• Do not connect this unit or other components to the main power until all connections between components are complete.
• All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner's manual for each of your components.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.
Audio
output
Audio
Audio
input
output
CD recorder, etc.
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
Connecting recording devices
You can connect audio recording devices to the LINE 2-3 (REC) jacks. This jack output analog audio signals selected as the input.
Note
• Be sure to use the LINE 2-3 (REC) jacks only for connecting recording devices.
• If you select LINE2 as the input source, the audio output of the LINE 2 (REC) jacks will be muted. If you select LINE3 as the
input source, the audio output of the LINE 3 (REC) jacks will be muted.
10
En
Connections
Turntable
DVD player, etc.
Audio output
GND
(digital optical)
O
Audio
output
CD player
CD player, etc.
Audio output
(digital coaxial)
C
Subwoofer
Speakers A
Speakers B