Yamaha RX-V800RDS Panduan Servis - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Servis untuk Penerima Yamaha RX-V800RDS. Yamaha RX-V800RDS 46 halaman.
Halaman CetakRX-V800/RX-V800RDS/HTR-5280
SELF DIAGNOSIS FUNCTION (DIAG)
There are 13 DIAG menu items each of which has sub-menu items. Listed in the table below are menu items and sub-menu
items.
No. DIAG menu
1
DSP THROUGH
2
HP ROUTE
3
RAM THROUGH
4
PRO LOGIC
5
SPEAKERS SET
6
DISPLAY CHECK
7
MANUAL TEST
8
RS-232C
9
PRESET
10 AD DATA CHECK
11 IF STATUS
12 DSP RAM CHECK
13 VERSION/CHECK SUM/PORT
9
sub-menu
1. ANALOG BYPAS (ANALOG BYPASS)
2. DSP 0dB
3. DSP FULL BIT
1. HP 0dB
2. HP FULL BIT
1. RAM 0dB
2. MAIN ATT
1. YSS928
1. MAIN:SML 0dB (MAIN:SMALL 0dB)
2. MAIN:LRG -10dB (MAIN:LARGE -10dB)
3. CENTER:NONE
4. LFE/B:MAIN (LFE/BASS:MAIN)
5. Front Mix:5ch
1. VFD CHECK (initial screen)
2. VFD DISP OFF (All segments OFF)
3. VFD DISP ALL (All segments ON 100%)
4. VFD DIMMER (All segments ON 50%)
5. CHECKED PATTERN (ON in lattice)
1. ALL
2. MAIN L
3. CENTER
4. MAIN R
5. REAR R
6. REAR L
7. LFE
1. TxRx DATA (unused)
2. HARD FLOW (unused)
1. PRESET INHIBIT (memory initialization inhibited) –
2. PRESET RESERVED (memory initialized)
1. REC-OUT (unused)
2. K0/K1 (panel key)
3. DC/PS (protection)
1. IST (internal status)
2. CS1 (channel status 1)
3. CS2 (channel status 2)
4. CS3 (channel status 3)
5. CS4 (channel status 4)
6. CS5 (channel status 5)
7. BI1 (BSI-DD 1)
8. BI2 (BSI-DD 2)
9. BI3 (BSI-DD 3)
10. BI4 (BSI-DD 4)
11. BS1 (BSI-DTS 1)
12. BS2 (BSI-DTS 2)
13. BS3 (BSI-DTS 3)
14. BS4 (BSI-DTS 4)
15. YS1 (YSS-928-1)
16. YS2 (YSS-928-2)
17. YS3 (YSS-928-3)
Bus Check
1. VER. (Version information)
2. A/P (Checksum ALL/PROG)
3. 2/M (Checksum 232C/MAKER)
4. PORT (Port check)
Remote control code (key)
7A-90 (PRG 9)
7A-91 (PRG 10)
7A-92 (PRG 11)
7A-93 (PRG 12)
7A-10 (PRESET+)
7A-11 (PRESET-)
7A-12 (PAGE)
7A-0C (CD FF)
7A-88 (PRG 1)
7A-89 (PRG 2)
7A-8A (PRG 3)
7A-8B (PRG 4)
7A-8C (PRG 5)
7A-8F (PRG 8)
–
–
–
–
7A-00 (TP PLAY)
7A-01 (TP RW)
7A-02 (TP FW)
7A-03 (TP STOP)
7A-04 (TP PAUSE)
7A-06 (TP A/B)
7A-09 (CD STOP)
–
–
7A-57 (SLEEP)
–
–
7A-0B (CD SKIP-)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
7A-0A (CD SKIP+)
7A-0D (CD REW)
–
–
–